Manual Pages for UNIX Operating System command usage for man sfe

Devices                                                   sfe(7D)



NAME
     sfe - SiS900 series Fast Ethernet device driver

SYNOPSIS
     /dev/sfe


DESCRIPTION
     The sfe driver is a loadable, clonable,  GLD-based   STREAMS
     driver  supporting the Data Link Provider Interface dlpi(7P)
     on Silicon Integrated Systems 900 series Fast Ethernet  con-
     trollers.

APPLICATION PROGRAMMING INTERFACE
     The relevant  fields  returned  as  part  of  a  DL_INFO_ACK
     response are:

         o    Maximum SDU is 1500.

         o    Minimum SDU is 0.

         o    The dlsap address length is 8.

         o    MAC type is DL_ETHER.

         o    SAP length is -2. The 6-byte  physical  address  is
              followed immediately by a 2-byte SAP.

         o    Service mode is DL_CLDLS.

         o    Broadcast address is the 6-byte Ethernet  broadcast
              address (ff:ff:ff:ff:ff:ff).


     If the SAP provided is zero, then IEEE 802.3 mode is assumed
     and outbound frames will have the frame payload length writ-
     ten into the type field. Likewise, inbound frames with a SAP
     between  zero  and 1500 are interpreted as IEEE 802.3 frames
     and delivered to any streams that are bound to SAP zero (the
     802.3 SAP).

PROPERTIES
     The following properties  may  be  configured  using  either
     ndd(1M)  or  the sfe.conf configuration file as described by
     driver.conf(4):

     adv_100fdx_cap

         Enables the 100 Base TX full-duplex link  option.  (This
         is generally the fastest mode if both link partners sup-
         port it. Most modern equipment supports this mode.)




SunOS 5.11          Last change: 12 Dec 2007                    1






Devices                                                   sfe(7D)



     adv_100hdx_cap

         Enables the 100 Base TX half-duplex link option.  (Typi-
         cally used when the link partner is a 100 Mbps hub.)


     adv_10fdx_cap

         Enables the 10 Base-T full-duplex  link  option.   (This
         less-frequently  used  mode  is  typically used when the
         link partner is a 10 Mbps switch.)


     adv_10hdx_cap

         Enables the 10 Base-T half-duplex link option.  (This is
         the  fall-back when no other option is available.  It is
         typically used when the link partner is a 10 Mbps hub or
         is an older network card.)


ATTRIBUTES
     See attributes(5) for a description of the following  attri-
     butes:



     ____________________________________________________________
    |       ATTRIBUTE TYPE        |       ATTRIBUTE VALUE       |
    |_____________________________|_____________________________|
    | Availability                | SPARC, x86                  |
    |_____________________________|_____________________________|
    | Interface Stability         | Committed                   |
    |_____________________________|_____________________________|


FILES
     /dev/sfe

         Special character device.


     /kernel/drv/sfe

         32-bit driver binary (x86).


     /kernel/drv/amd64/sfe

         64-bit driver binary (x86).





SunOS 5.11          Last change: 12 Dec 2007                    2






Devices                                                   sfe(7D)



     /kernel/drv/sparcv9/sfe

         64-bit driver binary (SPARC).


     /kernel/drv/sfe.conf

         Configuration file.


SEE ALSO
     ndd(1M),   driver.conf(4),   attributes(5),    streamio(7I),
     dlpi(7P)


     IEEE  802.3  -  Institute  of  Electrical  and   Electronics
     Engineers, 2002






































SunOS 5.11          Last change: 12 Dec 2007                    3