Manual Pages for UNIX Operating System command usage for man sane-sm3600

SANE Scanner Access Now Easy                       sane-sm3600(5)



NAME
     sane-sm3600 - SANE backend for Microtek scanners  with  M011
     USB chip

DESCRIPTION
     The sane-sm3600 library implements a  SANE  (Scanner  Access
     Now  Easy)  backend  that  provides  access to some Microtek
     scanners with the Toshiba M011 custom USB chip.  This  back-
     end should be considered alpha.

     There are also backends for Microtek scanners with SCSI com-
     mand  set.   Refer to sane-microtek(5) and sane-microtek2(5)
     for details.

     At present, the following scanners are known  positively  to
     work with this backend:

          Vendor     Product id:     Remark:
          --------   --------------  -----------
          Microtek   ScanMaker 3600  all modes ok
          Microtek   ScanMaker 3700  reported to work
          Microtek   ScanMaker 3750  reported to work

     If you own a Microtek scanner with the M011 chip other  than
     the ones listed above, it may or may not work with SANE!


FRONTEND OPTIONS
     This backend dynamically enables the options for  the  fron-
     tend, that are supported by the scanner in dependence of the
     scanning-mode and other options. Not supported  options  are
     disabled.

     The following options are supported by the Microtek2-driver:

     Color, grayscale, halftone and lineart scans.

     contrast, brightness, control, gamma correction.


DEVICE NAMES
     This backend does not support device names in a standardized
     form.


CONFIGURATION
     This backend does not support  a  configuration  file  right
     now.


FILES
     /usr/lib/sane/libsane-sm3600.a



sane-backends 1.0.19Last change: 16 August 2005                  1






SANE Scanner Access Now Easy                       sane-sm3600(5)



          The static library implementing this backend.

     /usr/lib/sane/libsane-sm3600.so
          The shared library implementing this  backend  (present
          on systems that support dynamic loading).


ENVIRONMENT
     SANE_DEBUG_SM3600
          If the library was compiled with debug support enabled,
          this  environment variable controls the debug level for
          this backend.  E.g., a value of 128 requests all  debug
          output to be printed.  Smaller levels reduce verbosity.
          To see error messages on stderr  set  SANE_DEBUG_SM3600
          to 1.

          E.g. just say:
          export SANE_DEBUG_SM3600=5


SEE ALSO
     sane-microtek2(5), http://sm3600.sourceforge.net


AUTHOR
     Marian Eichholz (eichholz@computer.org)
     Glenn Ramsey (glenn@componic.com)


ATTRIBUTES
     See attributes(5) for descriptions of the  following  attri-
     butes:

     _________________________________________________________
    |   ATTRIBUTE TYPE   |           ATTRIBUTE VALUE         |
    |____________________|____________________________________|_
    | Availability       |  image/scanner/xsane/sane-backends|
    |____________________|____________________________________|_
    | Interface Stability|  Uncommitted                      |
    |____________________|___________________________________|

NOTES
     Source for SANE is available on http://opensolaris.org.












sane-backends 1.0.19Last change: 16 August 2005                  2