Windows PowerShell command on Get-command qlc
MyWebUniversity

Manual Pages for UNIX Operating System command usage for man qlc

Devices qlc(7D)

NAME

qlc - ISP2200, ISP2300, and SP212 Family Fibre Channel host

bus adapter driver.

SYNOPSIS

SUNW,qlc

DESCRIPTION

The qlc host bus adapter driver is a Sun Fibre Channel tran-

sport layer-compliant nexus driver for the Qlogic ISP2200,

ISP2200A, ISP2310, ISP2312, and SP212 adapters. These

adapters support Fibre Channel SCSI and IP Protocols, FC-

AL public loop profile, point-to-point fabric connection and

Fibre Channel service classes two and three (see NOTES sec-

tion below).

The qlc driver interfaces with the Sun Fibre Channel tran-

sport layer to support the standard functions provided by the SCSA interface. It supports auto request sense and tagged queueing by default. The driver requires that all

devices have unique hard addresses in private loop confi-

gurations. Devices with conflicting hard addresses are not accessible. FILES

/kernel/drv/qlc 32-bit ELF kernel module (x86)

/kernel/drv/amd64/qlc 64-bit ELF kernel module (x86)

/kernel/drv/sparcv9/qlc 64-bit ELF kernel module (SPARC)

/kernel/drv/qlc.conf Driver configuration file

ATTRIBUTES

See attributes(5) for descriptions of the following attri-

butes:

SunOS 5.11 Last change: 21 Feb 2005 1

Devices qlc(7D)

____________________________________________________________

| ATTRIBUTE TYPE | ATTRIBUTE VALUE |

|_____________________________|_____________________________|

| Architecture | SPARC, x86 |

|_____________________________|_____________________________|

| Availability | driver/network/qlc |

|_____________________________|_____________________________|

SEE ALSO

prtconf(1M), driver.conf(4), fcp(7D), fp(7d) Writing Device Drivers

ANSI X3.230:1994, Fibre Channel Physical Signaling (FC-PH)

Project 1134-D, Fibre Channel Generic Services (FC-GS-2)

ANSI X3.269-1996, Fibre Channel Arbitrated Loop (FC-AL)

ANSI X3.270-1996, Fibre Channel Protocol for SCSI (FCP-

SCSI)

ANSI X3.270-1996, SCSI-3 Architecture Model (SAM)

Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)

Fabric Loop Attachment (FC-FLA)

ISP2200 Firmware Interface Specification, QLogic Corporation ISP2300 Series Firmware Specification, QLogic Corporation NOTES

SP-212-based host bus adapters (including QLA-210) are sup-

ported on x86 platforms only and are limited to a maximum of 8 targets in fabric and sixteen targets in local loop

topology. FL topology is not supported with the SP-212-based

host bus adapter.

SunOS 5.11 Last change: 21 Feb 2005 2




Contact us      |      About us      |      Term of use      |       Copyright © 2000-2019 MyWebUniversity.com ™