Windows PowerShell command on Get-command pppstats
MyWebUniversity

Manual Pages for UNIX Operating System command usage for man pppstats

System Administration Commands pppstats(1M)

NAME

pppstats - print PPP statistics

SYNOPSIS

pppstats [-a] [-v] [-r] [-z] [-c ] [-w ]

[interface]

DESCRIPTION

The pppstats utility reports PPP-related statistics at regu-

lar intervals for the specified PPP interface. If the inter-

face is unspecified, pppstats defaults to sppp0. The display

is split horizontally into input and output sections con-

taining columns of statistics describing the properties and volume of packets received and transmitted by the interface. OPTIONS

The pppstats options are:

-a Display absolute values rather than deltas.

With this option, all reports show statistics

for the time elapsed since the link was ini-

tiated. Without this option, the second and subsequent reports show statistics for the time since the last report.

-c count Repeat the display count times. If this option

is not specified, the default repeat count is 1

if the -w option is not specified, otherwise

infinity.

-r Display additional statistics summarizing the

compression ratio achieved by the packet compression algorithm in use.

-v Display additional statistics relating to the

performance of the Van Jacobson TCP header compression algorithm.

-w wait Pause wait seconds between each display. If

this option is not specified, the default interval is five seconds.

-z Instead of the standard display, show statis-

tics indicating the performance of the packet compression algorithm in use.

SunOS 5.11 Last change: 4 May 2001 1

System Administration Commands pppstats(1M)

EXTENDED DESCRIPTION

The following fields are printed on the input side when the

-z option is not used:

IN Total number of bytes received by this interface.

PACK Total number of packets received by this inter-

face.

VJCOMP Number of header-compressed TCP packets received

by this interface.

VJUNC Number of header-uncompressed TCP packets

received by this interface. Not reported when the

-r option is specified.

VJERR Number of corrupted or bogus header-compressed

TCP packets received by this interface. Not

reported when the -r option is specified.

VJTOSS Number of VJ header-compressed TCP packets

dropped on reception by this interface because of

preceding errors. Only reported when the -v

option is specified.

NON-VJ Total number of non-TCP packets received by this

interface. Only reported when the -v option is

specified. RATIO Compression ratio achieved for received packets by the packet compression scheme in use, defined as the uncompressed size divided by the

compressed size. Only reported when the -r option

is specified.

UBYTE Total number of bytes received, after decompres-

sion of compressed packets. Only reported when

the -r option is specified.

The following fields are printed on the output side:

SunOS 5.11 Last change: 4 May 2001 2

System Administration Commands pppstats(1M)

OUT Total number of bytes transmitted from this inter-

face. PACK Total number of packets transmitted from this interface.

VJCOMP Number of TCP packets transmitted from this inter-

face with VJ-compressed TCP headers.

VJUNC Number of TCP packets transmitted from this inter-

face with VJ-uncompressed TCP headers. Not

reported when the -r option is specified.

NON-VJ Total number of non-TCP packets transmitted from

this interface. Not reported when the -r option is

specified. VJSRCH Number of searches for the cached header entry for a VJ header compressed TCP packet. Only reported

when the -v option is specified.

VJMISS Number of failed searches for the cached header entry for a VJ header compressed TCP packet. Only

reported when the -v option is specified.

RATIO Compression ratio achieved for transmitted packets by the packet compression scheme in use, defined as the size before compression divided by the

compressed size. Only reported when the -r option

is specified. UBYTE Total number of bytes to be transmitted before packet compression is applied. Only reported when

the -r option is specified.

When the -z option is specified, pppstats displays the fol-

lowing fields relating to the packet compression algorithm currently in use. If packet compression is not in use, these fields display zeroes. The fields displayed on the input side are:

SunOS 5.11 Last change: 4 May 2001 3

System Administration Commands pppstats(1M)

COMPRESSED BYTE Number of bytes of compressed packets received. COMPRESSED PACK Number of compressed packets received. INCOMPRESSIBLE BYTE Number of bytes of incompressible packets (that is, those which were transmitted in uncompressed form) received. INCOMPRESSIBLE PACK Number of incompressible packets received. COMP RATIO Recent compression ratio for incoming packets, defined as the uncompressed size divided by the compressed size (including both compressible and incompressible packets). The fields displayed on the output side are: COMPRESSED BYTE Number of bytes of compressed packets transmitted. COMPRESSED PACK Number of compressed packets transmitted. INCOMPRESSIBLE BYTE Number of bytes of incompressible packets received; that is, those that were transmitted by the peer in uncompressed form. INCOMPRESSIBLE PACK Number of incompressible packets transmitted. COMP RATIO Recent compression ratio for outgoing packets.

ATTRIBUTES

SunOS 5.11 Last change: 4 May 2001 4

System Administration Commands pppstats(1M)

See attributes(5) for descriptions of the following attri-

butes:

____________________________________________________________

| ATTRIBUTE TYPE | ATTRIBUTE VALUE |

|_____________________________|_____________________________|

| Availability | system/network/ppp |

|_____________________________|_____________________________|

| Interface Stability | Committed |

|_____________________________|_____________________________|

SEE ALSO

pppd(1M), attributes(5)

SunOS 5.11 Last change: 4 May 2001 5




Contact us      |      About us      |      Term of use      |       Copyright © 2000-2019 MyWebUniversity.com ™