Windows PowerShell command on Get-command mr_sas
MyWebUniversity

Manual Pages for UNIX Operating System command usage for man mr_sas

Devices mr_sas(7D)

NAME

mr_sas - LSI MegaRAID SAS2.0 Controller HBA driver

DESCRIPTION

The mr_sas MegaRAID SAS2.0 controller host bus adapter

driver is a SCSA-compliant nexus driver that supports the

LSI MegaRAID SAS 92xx series of controllers and the Sun StorageTek 6Gb/s SAS RAID HBA series of controllers. Some of the RAID Features include the following: o RAID levels 0, 1, 5, and 6 o RAID spans 10, 50, and 60 o Online Capacity Expansion (OCE) o Online RAID Level Migration (RLM) o Auto resume after loss of system power during arrays array rebuild or reconstruction (RLM) o Configurable stripe size up to 1MB o Check Consistency for background data integrity o Patrol read for media scanning and repairing o 64 logical drive support o Up to 64TB LUN support o Automatic rebuild o Global and dedicated Hot Spare support

The mr_sas driver also supports the following Dell cards:

PERC H700 Integrated, PERC H700 Adapter, PERC H700 Modular, and the PERC H800 Adapter. Configuration

The uneditable mr_sas.conf file contains one user private

configurable parameter, for MSI or MSI-X support. Configure

your hardware through the related BIOS utility or the Mega-

Cli Configuration Utility. If you want to install to a drive

attached to a mr_sas HBA, create the virtual drive first

from the BIOS (X86) before running Solaris install. The MegaCli utility can be downloaded from the LSI website.

SunOS 5.11 Last change: 17 Nov 2009 1

Devices mr_sas(7D)

The LSI MegaRAID SAS device can support up to 64 virtual SAS2.0, SAS1.0, SATA3.0, or SATA 6.0 disks. The BIOS numbers the virtual disks as 1 through 64, however in Solaris these drives are numbered from 0 to 63. Also keep in mind that SAS and SATA drives can not be configured into the same virtual disk. FILES

/kernel/drv/mr_sas 32-bit x86 ELF kernel module

/kernel/drv/amd64/mr_sas 64-bit kernel module x86 ELF

kernel module

/kernel/drv/sparcv9/mr_sas 64-bit SPARC ELF kernel module

/kernel/drv/mr_sas.conf Driver configuration file con-

taining one user-configurable

option. This file is not edit-

able.

ATTRIBUTES

See attributes(5) for a description of the following attri-

butes:

____________________________________________________________

| ATTRIBUTE TYPE | ATTRIBUTE VALUE |

|_____________________________|_____________________________|

| Architecture | SPARC, x86 |

|_____________________________|_____________________________|

| Availability | driver/storage/mr_sas |

|_____________________________|_____________________________|

| Interface Stability | Uncommitted |

|_____________________________|_____________________________|

SEE ALSO

prtconf(1M), attributes(5), sata(7D),

scsi_hba_attach_setup(9F), scsi_sync_pkt(9F),

scsi_transport(9F), scsi_device(9S), scsi_inquiry(9S),

scsi_pkt(9S)

Small Computer System Interface-2 (SCSI-2)

NOTES

SunOS 5.11 Last change: 17 Nov 2009 2

Devices mr_sas(7D)

The mr_sas driver only supports internal and external

expanders that are not fully SAS1.0 or fully SAS2.0 compli-

ant.

SunOS 5.11 Last change: 17 Nov 2009 3




Contact us      |      About us      |      Term of use      |       Copyright © 2000-2019 MyWebUniversity.com ™