User Commands more(1)
NAME
more, page - browse or page through a text file
SYNOPSIS
/usr/bin/more [-cdflrsuw] [-lines] [+ linenumber]
[+/ pattern] [file].../usr/bin/page [-cdflrsuw] [-lines] [+ linenumber]
[+/ pattern] [file].../usr/xpg4/bin/more [-cdeisu] [-n number] [-p command]
[-t tagstring] [file]...
/usr/xpg4/bin/more [-cdeisu] [-n number] [+ command]
[-t tagstring] [file]...
DESCRIPTION
The more utility is a filter that displays the contents of a
text file on the terminal, one screenful at a time. It nor-
mally pauses after each screenful. /usr/bin/more then prints
--More-- and /usr/xpg4/bin/more then prints file at the bot-
tom of the screen. If more is reading from a file rather
than a pipe, the percentage of characters displayed so far is also shown.The more utility scrolls up to display one more line in
response to a RETURN character. more displays another
screenful in response to a SPACE character. Other commands are listed below. The page utility clears the screen before displaying thenext screenful of text. page only provides a one-line over-
lap between screens.The more utility sets the terminal to NOECHO mode, so that
the output can be continuous. Commands that you type do not normally show up on your terminal, except for the / and ! commands.The /usr/bin/more utility exits after displaying the last
specified file. /usr/xpg4/bin/more prompts for a command at
the last line of the last specified file.SunOS 5.11 Last change: 4 Nov 2005 1
User Commands more(1)
If the standard output is not a terminal, more acts just
like cat(1), except that a header is printed before each file in a series. OPTIONSThe following options are supported for both /usr/bin/more
and /usr/xpg4/bin/more:
-c Clears before displaying. Redraws the screen instead
of scrolling for faster displays. This option is ignored if the terminal does not have the ability to clear to the end of a line.-d Displays error messages rather than ringing the ter-
minal bell if an unrecognized command is used. This is helpful for inexperienced users.-s Squeeze. Replaces multiple blank lines with a single
blank line. This is helpful when viewing nroff(1) output on the screen./usr/bin/more
The following options are supported for /usr/bin/more only:
-f Does not fold long lines. This is useful when
lines contain nonprinting characters or escape sequences, such as those generated when nroff(1) output is piped through ul(1).-l Does not treat FORMFEED characters (Control-
l) as page breaks. If -l is not used, more
pauses to accept commands after any line con-
taining a ^L character (Control-l). Also, if
a file begins with a FORMFEED, the screen is cleared before the file is printed.-r Normally, more ignores control characters
that it does not interpret in some way. The-r option causes these to be displayed as ^C
where C stands for any such control charac-
ter.-u Suppresses generation of underlining escape
sequences. Normally, more handles underlin-
ing, such as that produced by nroff(1), in a manner appropriate to the terminal. If theSunOS 5.11 Last change: 4 Nov 2005 2
User Commands more(1)
terminal can perform underlining or has astand-out mode, more supplies appropriate
escape sequences as called for in the text file.-w Normally, more exits when it comes to the end
of its input. With -w, however, more prompts
and waits for any key to be struck before exiting.-lines Displays the indicated number of lines in
each screenful, rather than the default (the number of lines in the terminal screen less two). +linenumber Start up at linenumber. +/pattern Start up two lines above the line containing the regular expression pattern. Note: Unlike editors, this construct should not end with a `/.' If it does, then the trailing slash is taken as a character in the search pattern./usr/xpg4/bin/more
The following options are supported for /usr/xpg4/bin/more
only:-e Exits immediately after writing the last
line of the last file in the argument list.-i Performs pattern matching in searches
without regard to case.-n number Specifies the number of lines per screen-
ful. The number argument is a positivedecimal integer. The -n option overrides
any values obtained from the environment.-p command For each file examined, initially executes
+command the more command in the command argument.
If the command is a positioning command,such as a line number or a regular expres-
sion search, set the current position to represent the final results of the command,SunOS 5.11 Last change: 4 Nov 2005 3
User Commands more(1)
without writing any intermediate lines of the file. For example, the two commands:more -p 1000j file
more -p 1000G file
are equivalent and start the display withthe current position at line 1000, bypass-
ing the lines that j would write and scroll off the screen if it had been issued during the file examination. If the positioning command is unsuccessful, the first line in the file will be the current position.-t tagstring Writes the screenful of the file containing
the tag named by the tagstring argument. See the ctags(1) utility.-u Treats a backspace character as a printable
control character, displayed as a ^H(Control-h), suppressing backspacing and
the special handling that produces under-
lined or standout-mode text on some termi-
nal types. Also, does not ignore acarriage-return character at the end of a
line.If both the -t tagstring and -p command (or the obsolescent
+command) options are given, the -t tagstring is processed
first.USAGE
Environmentmore uses the terminal's terminfo(4) entry to determine its
display characteristics.more looks in the environment variable MORE for any preset
options. For instance, to page through files using the -c
mode by default, set the value of this variable to -c. (Nor-
mally, the command sequence to set up this environment vari-
able is placed in the .login or .profile file). Commands The commands take effect immediately. It is not necessary to type a carriage return unless the command requires a file, command, tagstring, or pattern. Up to the time when theSunOS 5.11 Last change: 4 Nov 2005 4
User Commands more(1)
command character itself is given, the user may type the line kill character to cancel the numerical argument being formed. In addition, the user may type the erase characterto redisplay the `--More--(xx%)' or file message.
In the following commands, i is a numerical argument (1 by default).iSPACE Display another screenful, or i more lines if i
is specified.iRETURN Display another line, or i more lines, if
specified.ib (Control-b) Skip back i screenfuls and then
i^B print a screenful.id (Control-d) Scroll forward one half screenful
i^D or i more lines. If i is specified, the count
becomes the default for subsequent d and u com-
mands. if Skip i screens full and then print a screenful.h Help. Give a description of all the more com-
mands.^L (Control-l) Refresh.
in Search for the ith occurrence of the last pat-
tern entered.q Exit from more.
Q is Skip i lines and then print a screenful. v Drop into the vi editor at the current line of the current file.SunOS 5.11 Last change: 4 Nov 2005 5
User Commands more(1)
iz Same as SPACE, except that i, if present, becomes the new default number of lines per screenful. = Display the current line number. i/pattern Search forward for the ith occurrence of theregular expression pattern. Display the screen-
ful starting two lines before the line thatcontains the ith match for the regular expres-
sion pattern, or the end of a pipe, whichevercomes first. If more is displaying a file and
there is no match, its position in the file remains unchanged. Regular expressions can be edited using erase and kill characters. Erasing back past the first column cancels the search command.!command Invoke a shell to execute command. The charac-
ters % and !, when used within command are
replaced with the current filename and the pre-
vious shell command, respectively. If there isno current filename, % is not expanded. Prepend
a backslash to these characters to escape expansion. :f Display the current filename and line number.i:n Skip to the ith next filename given in the com-
mand line, or to the last filename in the list if i is out of range. i:p Skip to the ith previous filename given in the command line, or to the first filename if i isout of range. If given while more is positioned
within a file, go to the beginning of the file.If more is reading from a pipe, more simply
rings the terminal bell.:q Exit from more (same as q or Q).
:Q/usr/bin/more
The following commands are available only in /usr/bin/more:
SunOS 5.11 Last change: 4 Nov 2005 6
User Commands more(1)
' Single quote. Go to the point from which the last search started. If no search has been performed in the current file, go to the beginning of the file. . Dot. Repeat the previous command.^\ Halt a partial display of text. more stops sending
output, and displays the usual --More-- prompt.
Some output is lost as a result./usr/xpg4/bin/more
The following commands are available only in/usr/xpg4/bin/more:
i^F (Control-f) Skip i screens full and print a
screenful. (Same as if.)^G (Control-g) Display the current line number
(same as =). ig Go to line number i with the default of the first line in the file. iG Go to line number i with the default of the Last line in the file.ij Display another line, or i more lines, if
specified. (Same as iRETURN.)ik Scroll backwards one or i lines, if speci-
fied. mletter Mark the current position with the name letter. N Reverse direction of search. r Refresh the screen.SunOS 5.11 Last change: 4 Nov 2005 7
User Commands more(1)
R Refresh the screen, discarding any buffered input.iu (Control-u) Scroll backwards one half a
i^U screen of i lines, if specified. If i is specified, the count becomes the new default for subsequent d and u commands.ZZ Exit from more (same as q).
:e file Examine (display) a new file. If no file is specified, the current file is redisplayed.:t tagstring Go to the tag named by the tagstring argu-
ment and scroll/rewrite the screen with the tagged line in the current position. See the ctags utility. 'letter Return to the position that was previously marked with the name letter. '' Return to the position from which the lastmove of more than a screenful was made.
Defaults to the beginning of the file. i?[!]pattern Search backward in the file for the ithline containing the pattern. The ! speci-
fies to search backward for the ith line that does not contain the pattern. i/!pattern Search forward in the file for the ith line that does not contain the pattern. ![command] Invoke a shell or the specified command. Large File BehaviorSee largefile(5) for the description of the behavior of more
and page when encountering files greater than or equal to 2 Gbyte ( 2^31 bytes). ENVIRONMENT VARIABLESSunOS 5.11 Last change: 4 Nov 2005 8
User Commands more(1)
See environ(5) for descriptions of the following environmentvariables that affect the execution of more: LANG, LC_ALL,
LC_COLLATE (/usr/xpg4/bin/more only), LC_CTYPE, LC_MESSAGES,
NLSPATH, and TERM./usr/xpg4/bin/more
The following environment variables also affect the execu-
tion of /usr/xpg4/bin/more:
COLUMNS Overrides the system selected horizontal screen size. EDITOR Used by the v command to select an editor. LINES Overrides the system selected vertical screensize. The -n option has precedence over LINES in
determining the number of lines in a screen. MORE A string specifying options as described in the OPTIONS section, above. As in a command line,The options must be separated by blank charac-
ters and each option specification must startwith a -. Any command line options are processed
after those specified in MORE as though the com-
mand line were: more $MORE options operands
EXIT STATUS The following exit values are returned: 0 Successful completion. >0 An error occurred. FILES/usr/lib/more.help help file for /usr/bin/more and
/usr/bin/page only.ATTRIBUTES
See attributes(5) for descriptions of the following attri-
butes:/usr/bin/more /usr/bin/page
SunOS 5.11 Last change: 4 Nov 2005 9
User Commands more(1)
____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| Availability | SUNWcs ||_____________________________|_____________________________|
| CSI | Not enabled ||_____________________________|_____________________________|
/usr/xpg4/bin/more
____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| Availability | SUNWxcu4 ||_____________________________|_____________________________|
| CSI | Enabled ||_____________________________|_____________________________|
| Interface Stability | Committed ||_____________________________|_____________________________|
| Standard | See standards(5). ||_____________________________|_____________________________|
SEE ALSO
cat(1), csh(1), ctags(1), man(1), nroff(1), script(1),sh(1), ul(1), terminfo(4), attributes(5), environ(5), large-
file(5), standards(5)/usr/bin/more /usr/bin/page
regcomp(3C)/usr/xpg4/bin/more
regex(5) NOTES/usr/bin/more
Skipping backwards is too slow on large files./usr/xpg4/bin/more
This utility will not behave correctly if the terminal is not set up properly.SunOS 5.11 Last change: 4 Nov 2005 10