System Administration Commands lockfs(1M)
NAME
lockfs - change or report file system locks
SYNOPSIS
/usr/sbin/lockfs [-adefhnuw] [-c string] [file-system]...
DESCRIPTION
lockfs is used to change and report the status of file sys-
tem locks. lockfs reports the lock status and unlocks the
file systems that were improperly left locked.Using lockfs to lock a file system is discouraged because
this requires extensive knowledge of SunOS internals to be used effectively and correctly.When invoked with no arguments, lockfs lists the UFS file
systems that are locked. If file-system is not specified,
and -a is specified, lockfs is run on all mounted, UFS type
file systems. OPTIONS The options are mutually exclusive: wndheuf. If you dospecify more than one of these options on a lockfs command
line, the utility does not protest and invokes only the last option specified. In particular, you cannot specify a flush(-f) and a lock (for example, -w) on the same command line.
However, all locking operations implicitly perform a flush,so the -f is superfluous when specifying a lock.
You must be super-user to use any of the following options,
with the exception of -a, -f and -v.
The following options are supported.-a
Apply command to all mounted, UFS type file systems.file-system is ignored when -a is specified.
-c string
Accept a string that is passed as the comment field. The-c only takes affect when the lock is being set using
the -d, -h, -n, -u, or -w options.
SunOS 5.11 Last change: 2 Jan 2008 1
System Administration Commands lockfs(1M)
-d
Delete-lock (dlock) the specified file-system. dlock
suspends access that could remove directory entries.-e
Error-lock (elock) the specified file-system. elock
blocks all local access to the locked file system and returns EWOULDBLOCK on all remote access. File systemsare elocked by UFS on detection of internal incon-
sistency. They may only be unlocked after successful repair by fsck, which is usually done automatically (seemount_ufs(1M)). elocked file systems can be unmounted.
-f
Force a synchronous flush of all data that is dirty at the time fsflush is run to its backing store for the named file system (or for all file systems.) It is a more reliable method than using sync(1M) because it does not return until all possible data has been pushed. In the case of UFS filesystems with loggingenabled, the log is also rolled before returning. Addi-
tional data can be modified by the time fsflush exits, so using one of the locking options is more likely to be of general use.-h
Hard-lock (hlock) the specified file-system. hlock
returns an error on every access to the locked file sys-
tem, and cannot be unlocked. hlocked file systems can be unmounted.-n
Name-lock (nlock) the specified file-system. nlock
suspends accesses that could change or remove existing directories entries.-u
Unlock (ulock) the specified file-system. ulock awakens
suspended accesses.SunOS 5.11 Last change: 2 Jan 2008 2
System Administration Commands lockfs(1M)
-v
Enable verbose output.-w
Write-lock (wlock) the specified file-system. wlock
suspends writes that would modify the file system.Access times are not kept while a file system is write-
locked. OPERANDS The following operands are supported.file-system
A list of path names separated by whitespace. Note thatfile-system can be a directory rather than the specific
name of a file system, such as / or /usr. For example,if you specify /export/home as an argument to a lockfs
command and /export/home is mounted on the root (/) filesystem, the lockfs command will take effect on the root
file system.USAGE
See largefile(5) for the description of the behavior oflockfs when encountering files greater than or equal to 2
Gbyte ( 2^31 bytes).EXAMPLES
Example 1 Using lockfs -a
In the following examples, filesystem is the pathname of themounted-on directory (mount point). Locktype is one of
"write," "name," "delete," "hard," or "unlock". When enclosed in parenthesis, the lock is being set. Comment is a string set by the process that last issued a lock command.The following example shows the lockfs output when only the
-a option is specified.
example# /usr/sbin/lockfs -a
SunOS 5.11 Last change: 2 Jan 2008 3
System Administration Commands lockfs(1M)
Filesystem Locktype Comment / unlock /var unlockexample#
Example 2 Using lockfs -w
The following example shows the lockfs output when the -w
option is used to write lock the /var file system and thecomment string is set using the -c option. The -a option is
then specified on a separate command line.example# /usr/sbin/lockfs -w -c "lockfs: write lock example" /var
example# /usr/sbin/lockfs -a
Filesystem Locktype Comment / unlock/var write lockfs: write lock example
example#
Example 3 Using lockfs -u
The following example shows the lockfs output when the -u
option is used to unlock the /var file system and the com-
ment string is set using the -c option.
example# /usr/sbin/lockfs -uc "lockfs: unlock example" /var
example# /usr/sbin/lockfs /var
Filesystem Locktype Comment/var unlock lockfs: unlock example
SunOS 5.11 Last change: 2 Jan 2008 4
System Administration Commands lockfs(1M)
example#
ATTRIBUTES
See attributes(5) for descriptions of the following attri-
butes:____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| Availability | SUNWcs ||_____________________________|_____________________________|
SEE ALSO
kill(1), mount_ufs(1M), sync(1M), attributes(5), large-
file(5), ufs(7FS), DIAGNOSTICS file system: Not owner You must be root to use this command. file system :Deadlock condition detected/avoided A file is enabled for accounting or swapping, on file system. file system: Device busy Another process is setting the lock on file system.SunOS 5.11 Last change: 2 Jan 2008 5