Windows PowerShell command on Get-command ixgbe
MyWebUniversity

Manual Pages for UNIX Operating System command usage for man ixgbe

Devices ixgbe(7D)

NAME

ixgbe - Intel 10Gb PCI Express NIC Driver

SYNOPSIS

/dev/ixgbe*

DESCRIPTION

The ixgbe 10 Gigabit Ethernet driver is a multi-threaded,

loadable, clonable, GLD-based STREAMS driver supporting the

Data Link Provider Interface, dlpi(7P), on Intel 10-Gigabit

PCI Express Ethernet controllers.

The ixgbe driver functions include controller initializa-

tion, frame transmit and receive, promiscuous and multicast support, and error recovery and reporting.

The ixgbe driver and hardware support auto-negotiation, a

protocol specified by the IEEE 802.3ae specification. APPLICATION PROGRAMMING INTERFACE

The cloning character-special device, /dev/ixgbe, is used to

access all Intel 10 -Gigabit PCI Express Ethernet devices

installed within the system.

The ixgbe driver is managed by the dladm(1M) command line

utility, which allows VLANs to be defined on top of ixgbe

instances and for ixgbe instances to be aggregated. See

dladm(1M) for more details.

You must send an explicit DL_ATTACH_REQ message to associate

the opened stream with a particular device (PPA). The PPA ID

is interpreted as an unsigned integer data type and indi-

cates the corresponding device instance (unit) number. The

driver returns an error (DL_ERROR_ACK) if the PPA field

value does not correspond to a valid device instance number for the system. The device is initialized on first attach

and de-initialized (stopped) at last detach.

The values returned by the driver in the DL_INFO_ACK primi-

tive in response to your DL_INFO_REQ are:

o Maximum SDU is 16366. o Minimum SDU is 0. o DLSAP address length is 8.

SunOS 5.11 Last change: 3 Jun 2009 1

Devices ixgbe(7D)

o MAC type is DL_ETHER.

o SAP (Service Access Point) length value is -2,

meaning the physical address component is followed

immediately by a 2-byte SAP component within the

DLSAP address.

o Broadcast address value is the Ethernet/IEEE broad-

cast address (FF:FF:FF:FF:FF:FF).

Once in the DL_ATTACHED state, you must send a

DL_BIND_REQ to associate a particular SAP with the

stream. CONFIGURATION

By default, the ixgbe driver performs auto-negotiation to

select the link speed and mode. Link speed and mode can only

be 10000 Mbps full-duplex. See the IEEE802.3 standard for

more information. FILES

/dev/ixgbe* Special character device.

/kernel/drv/ixgbe 32-bit device driver (x86).

/kernel/drv/amd64/ixgbe 64-bit device driver (x86).

/kernel/drv/sparcv9/ixgbe 64-bit device driver (SPARC).

/kernel/drv/ixgbe.conf Configuration file.

ATTRIBUTES

See attributes(5) for descriptions of the following attri-

butes:

____________________________________________________________

| ATTRIBUTE TYPE ATTRIBUTE VALUE |

| Availability driver/network/ixgbe |

| Architecture SPARC, x86 | | Interface Stability Committed |

|___________________________________________________________|

SEE ALSO

SunOS 5.11 Last change: 3 Jun 2009 2

Devices ixgbe(7D)

dladm(1M), netstat(1M), driver.conf(4), attributes(5), streamio(7I), dlpi(7P) Writing Device Drivers STREAMS Programming Guide Network Interfaces Programmer's Guide

IEEE 802.3ae Specificiation, IEEE - 2002

SunOS 5.11 Last change: 3 Jun 2009 3




Contact us      |      About us      |      Term of use      |       Copyright © 2000-2019 MyWebUniversity.com ™