Windows PowerShell command on Get-command gmake

Manual Pages for UNIX Operating System command usage for man gmake

LOCAL USER COMMANDS MAKE(1)

NAME

make - GNU make utility to maintain groups of programs

SYNOPSIS

make [ -f makefile ] [ options ] ... [ targets ] ...

WARNING This man page is an extract of the documentation of GNU

make. It is updated only occasionally, because the GNU pro-

ject does not use nroff. For complete, current documenta-

tion, refer to the Info file make.info which is made from the Texinfo source file make.texi.

DESCRIPTION

The purpose of the make utility is to determine automati-

cally which pieces of a large program need to be recompiled, and issue the commands to recompile them. The manual describes the GNU implementation of make, which was written by Richard Stallman and Roland McGrath, and is currently maintained by Paul Smith. Our examples show C programs, since they are most common, but you can use make with any programming language whose compiler can be run with a shell command. In fact, make is not limited to programs. You can use it to describe any task where some files must be updated automatically from others whenever the others change. To prepare to use make, you must write a file called the makefile that describes the relationships among files in your program, and the states the commands for updating each file. In a program, typically the executable file is

updated from object files, which are in turn made by compil-

ing source files. Once a suitable makefile exists, each time you change some source files, this simple shell command: make suffices to perform all necessary recompilations. The make

program uses the makefile data base and the last-

modification times of the files to decide which of the files need to be updated. For each of those files, it issues the commands recorded in the data base. make executes commands in the makefile to update one or more

target names, where name is typically a program. If no -f

option is present, make will look for the makefiles GNU-

makefile, makefile, and Makefile, in that order. Normally you should call your makefile either makefile or

Makefile. (We recommend Makefile because it appears prom-

inently near the beginning of a directory listing, right GNU Last change: 22 August 1989 1 LOCAL USER COMMANDS MAKE(1) near other important files such as README.) The first name checked, GNUmakefile, is not recommended for most makefiles. You should use this name if you have a makefile that is specific to GNU make, and will not be understood by other

versions of make. If makefile is `-', the standard input is

read. make updates a target if it depends on prerequisite files that have been modified since the target was last modified, or if the target does not exist. OPTIONS

-b, -m

These options are ignored for compatibility with other versions of make.

-B, --always-make

Unconditionally make all targets.

-C dir, --directory=dir

Change to directory dir before reading the makefiles or

doing anything else. If multiple -C options are speci-

fied, each is interpreted relative to the previous one:

-C / -C etc is equivalent to -C /etc. This is typi-

cally used with recursive invocations of make.

-d Print debugging information in addition to normal pro-

cessing. The debugging information says which files

are being considered for remaking, which file-times are

being compared and with what results, which files actu-

ally need to be remade, which implicit rules are con-

sidered and which are applied---everything interesting

about how make decides what to do.

--debug[=FLAGS]

Print debugging information in addition to normal pro-

cessing. If the FLAGS are omitted, then the behavior

is the same as if -d was specified. FLAGS may be a for

all debugging output (same as using -d), b for basic

debugging, v for more verbose basic debugging, i for showing implicit rules, j for details on invocation of commands, and m for debugging while remaking makefiles.

-e, --environment-overrides

Give variables taken from the environment precedence over variables from makefiles.

+-f file, --file=file, --makefile=FILE

Use file as a makefile.

-i, --ignore-errors

Ignore all errors in commands executed to remake files. GNU Last change: 22 August 1989 2 LOCAL USER COMMANDS MAKE(1)

-I dir, --include-dir=dir

Specifies a directory dir to search for included

makefiles. If several -I options are used to specify

several directories, the directories are searched in the order specified. Unlike the arguments to other

flags of make, directories given with -I flags may come

directly after the flag: -Idir is allowed, as well as

-I dir. This syntax is allowed for compatibility with

the C preprocessor's -I flag.

-j [jobs], --jobs[=jobs]

Specifies the number of jobs (commands) to run simul-

taneously. If there is more than one -j option, the

last one is effective. If the -j option is given

without an argument, make will not limit the number of jobs that can run simultaneously.

-k, --keep-going

Continue as much as possible after an error. While the target that failed, and those that depend on it, cannot be remade, the other dependencies of these targets can be processed all the same.

-l [load], --load-average[=load]

Specifies that no new jobs (commands) should be started if there are others jobs running and the load average

is at least load (a floating-point number). With no

argument, removes a previous load limit.

-L, --check-symlink-times

Use the latest mtime between symlinks and target.

-n, --just-print, --dry-run,

Print the commands that would be executed, but do not execute them.

-o file, --old-file=file, --assume-old=file

Do not remake the file file even if it is older than its dependencies, and do not remake anything on account of changes in file. Essentially the file is treated as very old and its rules are ignored.

-p, --print-data-base

Print the data base (rules and variable values) that results from reading the makefiles; then execute as usual or as otherwise specified. This also prints the

version information given by the -v switch (see below).

To print the data base without trying to remake any

files, use make -p -f/dev/null.

-q, --question

``Question mode''. Do not run any commands, or print GNU Last change: 22 August 1989 3 LOCAL USER COMMANDS MAKE(1) anything; just return an exit status that is zero if the specified targets are already up to date, nonzero otherwise.

-r, --no-builtin-rules

Eliminate use of the built-in implicit rules. Also

clear out the default list of suffixes for suffix rules.

-R, --no-builtin-variables

Don't define any built-in variables.

-s, --silent, --quiet

Silent operation; do not print the commands as they are executed.

-S, --no-keep-going, --stop

Cancel the effect of the -k option. This is never

necessary except in a recursive make where -k might be

inherited from the top-level make via MAKEFLAGS or if

you set -k in MAKEFLAGS in your environment.

-t, --touch

Touch files (mark them up to date without really chang-

ing them) instead of running their commands. This is used to pretend that the commands were done, in order to fool future invocations of make.

-v, --version

Print the version of the make program plus a copyright,

a list of authors and a notice that there is no war-

ranty.

-w, --print-directory

Print a message containing the working directory before and after other processing. This may be useful for

tracking down errors from complicated nests of recur-

sive make commands.

--no-print-directory

Turn off -w, even if it was turned on implicitly.

-W file, --what-if=file, --new-file=file, --assume-new=file

Pretend that the target file has just been modified.

When used with the -n flag, this shows you what would

happen if you were to modify that file. Without -n, it

is almost the same as running a touch command on the

given file before running make, except that the modifi-

cation time is changed only in the imagination of make.

--warn-undefined-variables

Warn when an undefined variable is referenced. GNU Last change: 22 August 1989 4 LOCAL USER COMMANDS MAKE(1) EXIT STATUS GNU make exits with a status of zero if all makefiles were successfully parsed and no targets that were built failed.

A status of one will be returned if the -q flag was used and

make determines that a target needs to be rebuilt. A status of two will be returned if any errors were encountered.

BUGS

See the chapter `Problems and Bugs' in The GNU Make Manual. AUTHOR This manual page contributed by Dennis Morse of Stanford University. It has been reworked by Roland McGrath. Further updates contributed by Mike Frysinger. COPYRIGHT

tion, Inc. This file is part of GNU make. GNU make is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU make is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU make; see the file COPYING. If not, write to the Free Software Foundation, Inc., 51 Franklin St,

Fifth Floor, Boston, MA 02110-1301, USA.

ATTRIBUTES

See attributes(5) for descriptions of the following attri-

butes: GNU Last change: 22 August 1989 5 LOCAL USER COMMANDS MAKE(1)

________________________________________________

| ATTRIBUTE TYPE | ATTRIBUTE VALUE |

|____________________|___________________________|_

| Availability | developer/build/gnu-make|

|____________________|___________________________|_

| Interface Stability| Volatile |

|____________________|__________________________|

NOTES

Source for gmake is available on http://opensolaris.org.

GNU Last change: 22 August 1989 6