Manual Pages for UNIX Operating System command usage for man gld_unregister

Kernel Functions for Drivers                              gld(9F)



NAME
     gld,     gld_mac_alloc,     gld_mac_free,      gld_register,
     gld_unregister,  gld_recv, gld_sched, gld_intr - Generic LAN
     Driver service routines

SYNOPSIS
     #include 

     gld_mac_info_t *gld_mac_alloc(dev_info_t *dip);


     void gld_mac_free(gld_mac_info_t *macinfo);


     int gld_register(dev_info_t *dip, char *name, gld_mac_info_t *macinfo);


     int gld_unregister(gld_mac_info_t *macinfo);


     void gld_recv(gld_mac_info_t *macinfo, mblk_t *mp);


     void gld_sched(gld_mac_info_t *macinfo);


     uint_t gld_intr(caddr_t);


     void gld_linkstate(gld_mac_info_t *macinfo, int32_t newstate);


INTERFACE LEVEL
     Solaris architecture specific (Solaris DDI).

PARAMETERS
     macinfo      Pointer to a gld_mac_info(9S) structure.


     dip          Pointer to dev_info structure.


     name         Device interface name.


     mp           Pointer  to  a  message  block   containing   a
                  received packet.


     newstate     Media link state.





SunOS 5.11          Last change: 28 Aug 2003                    1






Kernel Functions for Drivers                              gld(9F)



DESCRIPTION
     gld_mac_alloc() allocates a new  gld_mac_info(9S)  structure
     and  returns  a  pointer to it. Some of the GLD-private ele-
     ments  of  the   structure   may   be   initialized   before
     gld_mac_alloc()  returns; all other elements are initialized
     to zero. The device driver must  initialize  some  structure
     members,  as  described  in gld_mac_info(9S), before passing
     the mac_info pointer to gld_register().


     gld_mac_free() frees a gld_mac_info(9S) structure previously
     allocated by gld_mac_alloc().


     gld_register() is called from the device driver's attach(9E)
     routine,  and  is  used  to link the GLD-based device driver
     with the GLD framework. Before  calling  gld_register()  the
     device   driver's   attach(9E)   routine   must   first  use
     gld_mac_alloc() to allocate  a  gld_mac_info(9S)  structure,
     and  initialize  several  of  its  structure  elements.  See
     gld_mac_info(9S) for more information. A successful call  to
     gld_register() performs the following actions:

         o    links the device-specific driver with the GLD  sys-
              tem;

         o    sets  the  device-specific  driver's  private  data
              pointer (using ddi_set_driver_private(9F)) to point
              to the macinfo structure;

         o    creates the minor device node.


     The device interface  name  passed  to  gld_register()  must
     exactly  match the name of the driver module as it exists in
     the filesystem.


     The driver's attach(9E) routine should return DDI_SUCCESS if
     gld_register()    succeeds.    If   gld_register()   returns
     DDI_FAILURE, the attach(9E) routine  should  deallocate  any
     resources  it  allocated  before  calling gld_register() and
     then also return DDI_FAILURE.


     gld_unregister() is called by the device driver's detach(9E)
     function, and if successful, performs the following tasks:

         o    ensures the device's interrupts are  stopped,  cal-
              ling the driver's gldm_stop() routine if necessary;

         o    removes the minor device node;



SunOS 5.11          Last change: 28 Aug 2003                    2






Kernel Functions for Drivers                              gld(9F)



         o    unlinks the device-specific  driver  from  the  GLD
              system.


     If gld_unregister() returns DDI_SUCCESS, the detach(9E) rou-
     tine  should deallocate any data structures allocated in the
     attach(9E) routine, using gld_mac_free() to  deallocate  the
     macinfo    structure,    and    return    DDI_SUCCESS.    If
     gld_unregister()   returns   DDI_FAILURE,    the    driver's
     detach(9E)  routine  must  leave  the device operational and
     return DDI_FAILURE.


     gld_recv() is called by the driver's  interrupt  handler  to
     pass  a  received packet upstream. The driver must construct
     and pass a STREAMS M_DATA message containing the raw packet.
     gld_recv()  determines  which STREAMS queues, if any, should
     receive a copy of the packet, duplicating it  if  necessary.
     It  then formats a DL_UNITDATA_IND message, if required, and
     passes the data up all appropriate streams.


     The driver should avoid holding mutex or other locks  during
     the  call  to gld_recv(). In particular, locks that could be
     taken by a transmit thread may not be held during a call  to
     gld_recv():  the  interrupt thread that calls gld_recv() may
     in some cases carry out processing that includes sending  an
     outgoing  packet,  resulting  in  a  call  to  the  driver's
     gldm_send() routine. If the gldm_send() routine were to  try
     to  acquire a mutex being held by the gldm_intr() routine at
     the time it calls gld_recv(), this could result in  a  panic
     due to recursive mutex entry.


     gld_sched() is called by the  device  driver  to  reschedule
     stalled  outbound packets. Whenever the driver's gldm_send()
     routine has returned GLD_NORESOURCES, the driver must  later
     call  gld_sched() to inform the GLD framework that it should
     retry  the  packets  that  previously  could  not  be  sent.
     gld_sched()  should  be  called  as  soon  as possible after
     resources are again available, to ensure  that  GLD  resumes
     passing outbound packets to the driver's gldm_send() routine
     in a timely way. (If the  driver's  gldm_stop()  routine  is
     called, the driver is absolved from this obligation until it
     later again returns  GLD_NORESOURCES  from  its  gldm_send()
     routine;  however, extra calls to gld_sched() will not cause
     incorrect operation.)


     gld_intr() is GLD's main interrupt handler. Normally  it  is
     specified  as  the  interrupt routine in the device driver's
     call to ddi_add_intr(9F).  The  argument  to  the  interrupt



SunOS 5.11          Last change: 28 Aug 2003                    3






Kernel Functions for Drivers                              gld(9F)



     handler   (specified  as  int_handler_arg  in  the  call  to
     ddi_add_intr(9F)) must be a pointer to the  gld_mac_info(9S)
     structure.  gld_intr() will, when appropriate, call the dev-
     ice driver's gldm_intr() function, passing that  pointer  to
     the  gld_mac_info(9S) structure. However, if the driver uses
     a high-level interrupt, it must provide its  own  high-level
     interrupt  handler, and trigger a soft interrupt from within
     that. In this case, gld_intr() may be specified as the  soft
     interrupt handler in the call to ddi_add_softintr().


     gld_linkstate() is called by the device driver to notify GLD
     of  changes  in  the media link state. The newstate argument
     should be set to one of the following:

     GLD_LINKSTATE_DOWN        The media link is unavailable.


     GLD_LINKSTATE_UP          The media link is unavailable.


     GLD_LINKSTATE_UNKNOWN     The status of the  media  link  is
                               unknown.



     If a driver calls gld_linkstate(),  it  must  also  set  the
     GLD_CAP_LINKSTATE bit  in the  gldm_capabilties field of the
     gld_mac_info(9S) structure.

RETURN VALUES
     gld_mac_alloc() returns a pointer to a new  gld_mac_info(9S)
     structure.


     gld_register() and gld_unregister() return:

     DDI_SUCCESS     on success.


     DDI_FAILURE     on failure.



     gld_intr() returns a  value  appropriate  for  an  interrupt
     handler.

SEE ALSO
     gld(7D), gld(9E), gld_mac_info(9S), gld_stats(9S), dlpi(7P),
     attach(9E), ddi_add_intr(9F).





SunOS 5.11          Last change: 28 Aug 2003                    4






Kernel Functions for Drivers                              gld(9F)



     Writing Device Drivers






















































SunOS 5.11          Last change: 28 Aug 2003                    5