System Administration Commands devinfo(1M)
NAME
devinfo - print device specific information
SYNOPSIS
/usr/sbin/devinfo -i device
/usr/sbin/devinfo -p device
DESCRIPTION
The devinfo command is used to print device specific infor-
mation about disk devices on standard out. The command can only be used by the superuser. OPTIONS-i Prints the following device information:
o Device name o Software version (not supported and prints as 0) o Drive id number (not supported and prints as 0) o Device blocks per cylinder o Device bytes per block o Number of device partitions with a block size greater than zero-p Prints the following device partition information:
o Device nameo Device major and minor numbers (in hexade-
cimal) o Partition start block o Number of blocks allocated to the partition o Partition flag o Partition tagSunOS 5.11 Last change: 8 May 1997 1
System Administration Commands devinfo(1M)
This command is used by various other commands to obtain device specific information for the making of file systems and determining partition information. If the device cannot be opened, an error message is reported. OPERANDS device Device name. EXIT STATUS 0 Successful operation. 2 Operation failed.ATTRIBUTES
See attributes(5) for descriptions of the following attri-
butes:____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| Availability | SUNWcs ||_____________________________|_____________________________|
SEE ALSO
prtvtoc(1M), attributes(5)SunOS 5.11 Last change: 8 May 1997 2