Devices bfe(7D)
NAME
bfe - Device driver for Broadcom BCM4401 100Base-T NIC
DESCRIPTION
The bfe Fast Ethernet driver is GLD-based and supports the
Broadcom BCM4401 100Base-T NIC adapters :pci14e4,170c Broad-
com BCM4401 100Base-T..
The bfe driver supports IEEE 802.3 auto-negotiation, flow
control and VLAN tagging. ConfigurationThe default configuration is auto-negotiation with bidirec-
tional flow control. The advertised capabilities for auto-
negotiation are based on the capabilities of the PHY.You can set the capabilities advertised by the bfe con-
trolled device using dladm(1M). The driver supports onlythose parameters which begin with en (enabled) in the param-
eters listed by the command dladm(1M). Each of these boolean parameters determines if the device advertises that mode of operation when the hardware supports it. FILES/dev/bfe Special character device
/kernel/drv/bfe 32-bit device driver (x86)
/kernel/drv/amd64/bfe 64-bit device driver (x86)
ATTRIBUTES
See attributes(5) for a description of the following attri-
butes:____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| Architecture | SPARC, x86 ||_____________________________|_____________________________|
SEE ALSO
dladm(1M), netstat(1M), driver.conf(4), attributes(5), ieee802.3(5), dlpi(7P), streamio(7I)SunOS 5.11 Last change: 23 Jun 2009 1
Devices bfe(7D)
Writing Device Drivers STREAMS Programmer's Guide Network Interface GuideIEEE 802.3ae Specification - 2002
SunOS 5.11 Last change: 23 Jun 2009 2