Manual Pages for UNIX Operating System command usage for man TIFFWriteScanline

Misc. Reference Manual Pages             TIFFWriteScanline(3TIFF)



NAME
     TIFFWriteScanline - write a scanline to an open TIFF file

SYNOPSIS
     #include 

     int TIFFWriteScanline(TIFF *tif, tdata_t buf, uint32 row

DESCRIPTION
     Write data to a file at the specified row. The sample param-
     eter  is  used only if data are organized in separate planes
     (PlanarConfiguration=2).   The  data  are  assumed   to   be
     uncompressed  and  in  the native bit- and byte-order of the
     host machine. The data written to  the  file  is  compressed
     according  to  the  compression  scheme  of the current TIFF
     directory (see further below). If the  current  scanline  is
     past  the  end of the current subfile, the ImageLength field
     is automatically increased to include the  scanline  (except
     for  PlanarConfiguration=2,  where the ImageLength cannot be
     changed once the first data are written). If the ImageLength
     is  increased,  the  StripOffsets and StripByteCounts fields
     are similarly enlarged to reflect data written past the pre-
     vious end of image.

NOTES
     The library writes encoded data  using  the  native  machine
     byte  order. Correctly implemented TIFF readers are expected
     to do any necessary byte-swapping to correctly process image
     data with BitsPerSample greater than 8. The library attempts
     to hide bit-ordering differences between the image  and  the
     native  machine  by  converting data from the native machine
     order.

     In C++ the sample parameter defaults to 0.

     Once data are written to a file for the  current  directory,
     the   values  of  certain  tags  may  not  be  altered;  see
     TIFFSetField(3TIFF) for more information.

     It is not possible to write scanlines to a file that uses  a
     tiled  organization.  The routine TIFFIsTiled can be used to
     determine if the file is organized as tiles or strips.

RETURN VALUES
     TIFFWriteScanline returns -1 if it  immediately  detects  an
     error and 1 for a successful write.

DIAGNOSTICS
     All error messages are directed to the TIFFError(3TIFF) rou-
     tine.





libtiff          Last change: December 16, 1991                 1






Misc. Reference Manual Pages             TIFFWriteScanline(3TIFF)



     %s: File not open for writing .  The  file  was  opened  for
     reading, not writing.

     Can not write scanlines to a tiled image.   An  attempt  was
     made  to  write  a  scanline  to a tiled image. The image is
     assumed to be organized in tiles because the  TileWidth  and
     TileLength tags have been set with TIFFSetField(3TIFF).

     Compression algorithm does not support random access.   Data
     was  written in a non-sequential order to a file that uses a
     compression algorithm and that has RowsPerStrip greater than
     one.  That  is,  data  in  the  image  is  to be stored in a
     compressed form, and with multiple rows packed into a strip.
     In  this case, the library does not support random access to
     the data. The  data  should  either  be  written  as  entire
     strips,  sequentially  by rows, or the value of RowsPerStrip
     should be set to one.

     %s: Must set "ImageWidth" before writing data.  The  image's
     width   has   not  be  set  before  the  first  write.   See
     TIFFSetField(3TIFF) for information on how to do this.

     %s: Must set "PlanarConfiguration" before writing data.  The
     organization  of  data  has  not be defined before the first
     write.  See TIFFSetField(3TIFF) for information on how to do
     this.

     Can not change "ImageLength"  when  using  separate  planes.
     Separate  image  planes  are  being  used  (PlanarConfigura-
     tion=2), but the number  of  rows  has  not  been  specified
     before  the  first  write.  The library supports the dynamic
     growth of an image only when data are organized  in  a  con-
     tiguous manner (PlanarConfiguration=1).

     %d: Sample out of range, max %d.  The sample  parameter  was
     greater than the value of the SamplesPerPixel tag.

     %s: No space for strip arrays .  There was not enough  space
     for the arrays that hold strip offsets and byte counts.

BUGS
     Writing  subsampled  YCbCR  data  does  not  work  correctly
     because, for PlanarConfiguration=2 the size of a scanline is
     not calculated on a per-sample basis, and  for  PlanarConfi-
     guration=1  the  library does not pack the block-interleaved
     samples.

SEE ALSO
     TIFFOpen(3TIFF),               TIFFWriteEncodedStrip(3TIFF),
     TIFFWriteRawStrip(3TIFF), libtiff(3TIFF)





libtiff          Last change: December 16, 1991                 2






Misc. Reference Manual Pages             TIFFWriteScanline(3TIFF)



     Libtiff            library            home             page:
     http://www.remotesensing.org/libtiff/





















































libtiff          Last change: December 16, 1991                 3