NAME
strptime - convert a string representation of time to a time tm struc‐ ture SYNOPSIS
#define XOPENSOURCE /* See featuretestmacros(7) */
#include
char *strptime(const char *s, const char *format, struct tm *tm); DESCRIPTION The strptime() function is the converse function to strftime(3) and converts the character string pointed to by s to values which are stored in the tm structure pointed to by tm, using the format specified by format. Here format is a character string that consists of field descriptors and text characters, reminiscent of scanf(3). Each field descriptor consists of a % character followed by another character that specifies the replacement for the field descriptor. All other charac‐ ters in the format string must have a matching character in the input string, except for whitespace, which matches zero or more whitespace characters in the input string. There should be whitespace or other alphanumeric characters between any two field descriptors. The strptime() function processes the input string from left to right. Each of the three possible input elements (whitespace, literal, or for‐ mat) are handled one after the other. If the input cannot be matched to the format string the function stops. The remainder of the format and input strings are not processed. The supported input field descriptors are listed below. In case a text string (such as a weekday or month name) is to be matched, the compari‐ son is case insensitive. In case a number is to be matched, leading zeros are permitted but not required.
%% The % character.
%a or %A The weekday name according to the current locale, in abbreviated form or the full name.
%b or %B or %h The month name according to the current locale, in abbreviated form or the full name.
%c The date and time representation for the current locale.
%C The century number (0-99).
%d or %e
The day of month (1-31).
%D Equivalent to %m/%d/%y. (This is the American style date, very
confusing to non-Americans, especially since %d/%m/%y is widely
used in Europe. The ISO 8601 standard format is %Y-%m-%d.)
%H The hour (0-23).
%I The hour on a 12-hour clock (1-12).
%j The day number in the year (1-366).
%m The month number (1-12).
%M The minute (0-59).
%n Arbitrary whitespace.
%p The locale's equivalent of AM or PM. (Note: there may be none.)
%r The 12-hour clock time (using the locale's AM or PM). In the
POSIX locale equivalent to %I:%M:%S %p. If tfmtampm is empty in the LCTIME part of the current locale then the behavior is undefined.
%R Equivalent to %H:%M.
%S The second (0-60; 60 may occur for leap seconds; earlier also 61 was allowed).
%t Arbitrary whitespace.
%T Equivalent to %H:%M:%S.
%U The week number with Sunday the first day of the week (0-53). The first Sunday of January is the first day of week 1.
%w The weekday number (0-6) with Sunday = 0.
%W The week number with Monday the first day of the week (0-53). The first Monday of January is the first day of week 1.
%x The date, using the locale's date format.
%X The time, using the locale's time format.
%y The year within century (0-99). When a century is not otherwise
specified, values in the range 69-99 refer to years in the twen‐
tieth century (1969-1999); values in the range 00-68 refer to
years in the twenty-first century (2000-2068).
%Y The year, including century (for example, 1991). Some field descriptors can be modified by the E or O modifier charac‐ ters to indicate that an alternative format or specification should be used. If the alternative format or specification does not exist in the current locale, the unmodified field descriptor is used. The E modifier specifies that the input string may contain alternative
locale-dependent versions of the date and time representation:
%Ec The locale's alternative date and time representation.
%EC The name of the base year (period) in the locale's alternative representation.
%Ex The locale's alternative date representation.
%EX The locale's alternative time representation.
%Ey The offset from %EC (year only) in the locale's alternative rep‐ resentation.
%EY The full alternative year representation. The O modifier specifies that the numerical input may be in an alterna‐
tive locale-dependent format:
%Od or %Oe The day of the month using the locale's alternative numeric sym‐ bols; leading zeros are permitted but not required.
%OH The hour (24-hour clock) using the locale's alternative numeric symbols.
%OI The hour (12-hour clock) using the locale's alternative numeric symbols.
%Om The month using the locale's alternative numeric symbols.
%OM The minutes using the locale's alternative numeric symbols.
%OS The seconds using the locale's alternative numeric symbols.
%OU The week number of the year (Sunday as the first day of the week) using the locale's alternative numeric symbols.
%Ow The number of the weekday (Sunday=0) using the locale's alterna‐ tive numeric symbols.
%OW The week number of the year (Monday as the first day of the week) using the locale's alternative numeric symbols.
%Oy The year (offset from %C) using the locale's alternative numeric symbols.
The broken-down time structure tm is defined in
as follows: struct tm { int tmsec; /* seconds */ int tmmin; /* minutes */ int tmhour; /* hours */ int tmmday; /* day of the month */ int tmmon; /* month */ int tmyear; /* year */ int tmwday; /* day of the week */ int tmyday; /* day in the year */ int tmisdst; /* daylight saving time */ }; RETURN VALUE The return value of the function is a pointer to the first character not processed in this function call. In case the input string contains more characters than required by the format string the return value points right after the last consumed input character. In case the whole input string is consumed the return value points to the null byte at the end of the string. If strptime() fails to match all of the for‐ mat string and therefore an error occurred the function returns NULL. ATTRIBUTES For an explanation of the terms used in this section, see attributes(7). ┌───────────┬───────────────┬────────────────────┐ │Interface │ Attribute │ Value │ ├───────────┼───────────────┼────────────────────┤ │strptime() │ Thread safety │ MT-Safe env locale │ └───────────┴───────────────┴────────────────────┘ CONFORMING TO
SUSv2, POSIX.1-2001. NOTES In principle, this function does not initialize tm but stores only the values specified. This means that tm should be initialized before the call. Details differ a bit between different UNIX systems. The glibc implementation does not touch those fields which are not explicitly specified, except that it recomputes the tmwday and tmyday field if any of the year, month, or day elements changed. This function is available since libc 4.6.8. Linux libc4 and libc5 includes define the prototype unconditionally; glibc2 includes provide a prototype only when XOPENSOURCE or GNUSOURCE are defined. Before libc 5.4.13 whitespace (and the 'n' and 't' specifications) was not handled, no 'E' and 'O' locale modifier characters were accepted, and the 'C' specification was a synonym for the 'c' specification. The 'y' (year in century) specification is taken to specify a year in the 20th century by libc4 and libc5. It is taken to be a year in the
range 1950-2049 by glibc 2.0. It is taken to be a year in 1969-2068 since glibc 2.1. Glibc notes For reasons of symmetry, glibc tries to support for strptime() the same format characters as for strftime(3). (In most cases the corresponding fields are parsed, but no field in tm is changed.) This leads to
%F Equivalent to %Y-%m-%d, the ISO 8601 date format.
%g The year corresponding to the ISO week number, but without the
century (0-99).
%G The year corresponding to the ISO week number. (For example, 1991.)
%u The day of the week as a decimal number (1-7, where Monday = 1).
%V The ISO 8601:1988 week number as a decimal number (1-53). If the week (starting on Monday) containing 1 January has four or more days in the new year, then it is considered week 1. Other‐ wise, it is the last week of the previous year, and the next week is week 1.
%z An RFC-822/ISO 8601 standard timezone specification.
%Z The timezone name.
Similarly, because of GNU extensions to strftime(3), %k is accepted as
a synonym for %H, and %l should be accepted as a synonym for %I, and %P
is accepted as a synonym for %p. Finally
%s The number of seconds since the Epoch, 1970-01-01 00:00:00 +0000 (UTC). Leap seconds are not counted unless leap second support is available. The glibc implementation does not require whitespace between two field descriptors. EXAMPLE The following example demonstrates the use of strptime() and strf‐ time(3).
#define XOPENSOURCE
#include
#include
#include
#include
int main(void) { struct tm tm; char buf[255]; memset(&tm, 0, sizeof(struct tm)); strptime("2001-11-12 18:31:01", "%Y-%m-%d %H:%M:%S", &tm);
strftime(buf, sizeof(buf), "%d %b %Y %H:%M", &tm); puts(buf); exit(EXITSUCCESS); } SEE ALSO time(2), getdate(3), scanf(3), setlocale(3), strftime(3) COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
GNU 2009-12-05 STRPTIME(3)