QMI-FIRMWARE-UPDATE(1) User Commands QMI-FIRMWARE-UPDATE(1)

NAME
       qmi-firmware-update - Update firmware in QMI devices

DESCRIPTION
   Usage:
              lt-qmi-firmware-update   [OPTION...]  FILE1  FILE2...  -  Update
              firmware in QMI devices

       Generic device selection options

       -s, busnum-devnum=[BUS:]DEV
              Select device by bus and device number (in decimal).

       -d, vid-pid=VID[:PID]
              Select device by device vendor and product id (in hexadecimal).

       -w, cdc-wdm=[PATH]
              Select  device   by   QMI/MBIM   cdc-wdm   device   path   (e.g.
              /dev/cdc-wdm0).

       -t, tty=[PATH]
              Select device by serial device path (e.g. /dev/ttyUSB2).

       Update options (normal mode)

       -u, update
              Launch firmware update process.

       -f, firmware-version=[VERSION]
              Firmware version (e.g. '05.05.58.00').

       -c, config-version=[VERSION]
              Config version (e.g. '005.025002').

       -C, carrier=[CARRIER]
              Carrier name (e.g. 'Generic').

       ignore-version-errors
              Run update operation even with version string errors.

       override-download
              Download images even if module says it already has them.

       modem-storage-index=[INDEX]
              Index storage for the modem image.

       skip-validation
              Don't wait to validate the running firmware after update.

       Reset options (normal mode)

       -b, reset
              Reset device into QDL download mode.

       Update options (QDL mode)

       -U, update-qdl
              Launch firmware update process in QDL mode.

       Verify options

       -z, verify
              Analyze and verify firmware images.

   Application Options:
       -p, device-open-proxy
              Request to use the 'qmi-proxy' proxy.

       device-open-qmi
              Open a cdc-wdm device explicitly in QMI mode

       device-open-mbim
              Open a cdc-wdm device explicitly in MBIM mode

       device-open-auto
              Open a cdc-wdm device in either QMI or MBIM mode (default)

       ignore-mm-runtime-check
              Ignore ModemManager runtime check

       -v, verbose
              Run  action  with verbose messages in standard output, including
              the debug ones.

       -S, silent
              Run action with no messages in standard  output;  not  even  the
              error ones.

       -L, verbose-log=[PATH]
              Write verbose messages to an output file.

       -V, version
              Print version.

       -h, help
              Show help.

       -H, help-examples
              Show help examples.

       ***************************************************************************
              Warning!

              ***************************************************************************

              Use  this  program with caution. The authors take *no* responsi‐
              bility if any device gets broken as a result of using this  pro‐
              gram.

              Please report issues to the libqmi mailing list at:

              libqmi-devel@lists.freedesktop.org

       qmi-firmware-update 1.18.0

              Copyright  (C)  2016-2017  Bj?rn  Mork  Copyright  (C) 2016-2017
              Zodiac Inflight Innovations Copyright (C)  2016-2017  Aleksander
              Morgado

       License      GPLv2+:     GNU     GPL     version     2     or     later
        This is free software:  you  are
       free  to  change  and  redistribute  it.   There is NO WARRANTY, to the
       extent permitted by law.

SEE ALSO
       The full documentation for qmi-firmware-update is maintained as a  Tex‐
       info manual.  If the info and qmi-firmware-update programs are properly
       installed at your site, the command

              info qmi-firmware-update

       should give you access to the complete manual.



qmi-firmware-update               March 2017            QMI-FIRMWARE-UPDATE(1)