Manual Pages for UNIX Darwin command on man traceroute

TRACEROUTE(8) BSD System Manager's Manual TRACEROUTE(8)

NAME

ttrraacceerroouuttee - print the route packets take to network host

SYNOPSIS

ttrraacceerroouuttee [-ddFFIISSddnnrrvvxx] [-ff firstttl] [-gg gateway] [-ii iface]

[-MM firstttl] [-mm maxttl] [-PP proto] [-pp port] [-qq nqueries]

[-ss srcaddr] [-tt tos] [-ww waittime] [-zz pausemsecs] host

[packetsize]

DESCRIPTION

The Internet is a large and complex aggregation of network hardware, con-

nected together by gateways. Tracking the route one's packets follow (or

finding the miscreant gateway that's discarding your packets) can be dif-

ficult. TTrraacceerroouuttee utilizes the IP protocol `time to live' field and attempts to elicit an ICMP TIMEEXCEEDED response from each gateway along the path to some host. The only mandatory parameter is the destination host name or IP number. The default probe datagram length is 40 bytes, but this may be increased by specifying a packet size (in bytes) after the destination host name. Other options are:

-ff firstttl

Set the initial time-to-live used in the first outgoing probe

packet.

-FF Set the "don't fragment" bit.

-dd Enable socket level debugging.

-gg gateway

Specify a loose source route gateway (8 maximum).

-ii iface

Specify a network interface to obtain the source IP address for

outgoing probe packets. This is normally only useful on a multi-

homed host. (See the -ss flag for another way to do this.)

-II Use ICMP ECHO instead of UDP datagrams. (A synonym for "-P

icmp").

-MM firstttl

Set the initial time-to-live value used in outgoing probe pack-

ets. The default is 1, i.e., start with the first hop.

-mm maxttl

Set the max time-to-live (max number of hops) used in outgoing

probe packets. The default is net.inet.ip.ttl hops (the same default used for TCP connections).

-nn Print hop addresses numerically rather than symbolically and

numerically (saves a nameserver address-to-name lookup for each

gateway found on the path).

-PP proto

Send packets of specified IP protocol. The currently supported protocols are: UDP , TCP , GRE and ICMP Other protocols may also be specified (either by name or by number), though ttrraacceerroouuttee does not implement any special knowledge of their packet formats. This option is useful for determining which router along a path

may be blocking packets based on IP protocol number. But see BUGS

below.

-pp port

Protocol specific. For UDP and TCP, sets the base port number used in probes (default is 33434). TTrraacceerroouuttee hopes that nothing

is listening on UDP ports base to base+nhops-1 at the destination

host (so an ICMP PORTUNREACHABLE message will be returned to terminate the route tracing). If something is listening on a port in the default range, this option can be used to pick an unused port range.

-qq nqueries

Set the number of probes per ``ttl'' to nqueries (default is three probes).

-rr Bypass the normal routing tables and send directly to a host on

an attached network. If the host is not on a directly-attached

network, an error is returned. This option can be used to ping a local host through an interface that has no route through it (e.g., after the interface was dropped by routed(8)).

-ss srcaddr

Use the following IP address (which must be given as an IP num-

ber, not a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this option can be used to force the source address to be something other than the IP address of the interface the probe packet is sent on. If the IP address is not one of this machine's interface addresses,

an error is returned and nothing is sent. (See the -ii flag for

another way to do this.)

-SS Print a summary of how many probes were not answered for each

hop.

-tt tos Set the type-of-service in probe packets to the following value

(default zero). The value must be a decimal integer in the range

0 to 255. This option can be used to see if different types-of-

service result in different paths. (If you are not running a 4.4BSD or later system, this may be academic since the normal network services like telnet and ftp don't let you control the

TOS). Not all values of TOS are legal or meaningful - see the IP

spec for definitions. Useful values are probably `-t 16' (low

delay) and `-t 8' (high throughput).

-vv Verbose output. Received ICMP packets other than TIMEEXCEEDED

and UNREACHABLEs are listed.

-ww Set the time (in seconds) to wait for a response to a probe

(default 5 sec.).

-xx Toggle IP checksums. Normally, this prevents traceroute from cal-

culating IP checksums. In some cases, the operating system can overwrite parts of the outgoing packet but not recalculate the

checksum (so in some cases the default is to not calculate check-

sums and using -xx causes them to be calculated). Note that check-

sums are usually required for the last hop when using ICMP ECHO

probes ( -II ). So they are always calculated when using ICMP.

-zz pausemsecs

Set the time (in milliseconds) to pause between probes (default 0). Some systems such as Solaris and routers such as Ciscos rate limit ICMP messages. A good value to use with this this is 500 (e.g. 1/2 second). This program attempts to trace the route an IP packet would follow to some internet host by launching UDP probe packets with a small ttl (time to live) then listening for an ICMP "time exceeded" reply from a gateway. We start our probes with a ttl of one and increase by one until we get an ICMP "port unreachable" (which means we got to "host") or hit a max

(which defaults to net.inet.ip.ttl hops & can be changed with the -mm

flag). Three probes (changed with -qq flag) are sent at each ttl setting

and a line is printed showing the ttl, address of the gateway and round

trip time of each probe. If the probe answers come from different gate-

ways, the address of each responding system will be printed. If there is

no response within a 5 sec. timeout interval (changed with the -ww flag),

a "*" is printed for that probe. We don't want the destination host to process the UDP probe packets so the destination port is set to an unlikely value (if some clod on the

destination is using that value, it can be changed with the -pp flag).

A sample use and output might be:

[yak 71]% traceroute nis.nsf.net.

traceroute to nis.nsf.net (35.1.1.48), 64 hops max, 38 byte packet

1 helios.ee.lbl.gov (128.3.112.1) 19 ms 19 ms 0 ms

2 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 39 ms 19 ms

3 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 39 ms 19 ms

4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 39 ms 40 ms 39 ms

5 ccn-nerif22.Berkeley.EDU (128.32.168.22) 39 ms 39 ms 39 ms

6 128.32.197.4 (128.32.197.4) 40 ms 59 ms 59 ms 7 131.119.2.5 (131.119.2.5) 59 ms 59 ms 59 ms 8 129.140.70.13 (129.140.70.13) 99 ms 99 ms 80 ms 9 129.140.71.6 (129.140.71.6) 139 ms 239 ms 319 ms 10 129.140.81.7 (129.140.81.7) 220 ms 199 ms 199 ms 11 nic.merit.edu (35.1.1.48) 239 ms 239 ms 239 ms Note that lines 2 & 3 are the same. This is due to a buggy kernel on the

2nd hop system - lbl-csam.arpa - that forwards packets with a zero ttl (a

bug in the distributed version of 4.3 BSD). Note that you have to guess

what path the packets are taking cross-country since the NSFNet (129.140)

doesn't supply address-to-name translations for its NSSes.

A more interesting example is:

[yak 72]% traceroute allspice.lcs.mit.edu.

traceroute to allspice.lcs.mit.edu (18.26.0.115), 64 hops max

1 helios.ee.lbl.gov (128.3.112.1) 0 ms 0 ms 0 ms

2 lilac-dmc.Berkeley.EDU (128.32.216.1) 19 ms 19 ms 19 ms

3 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 19 ms 19 ms

4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 19 ms 39 ms 39 ms

5 ccn-nerif22.Berkeley.EDU (128.32.168.22) 20 ms 39 ms 39 ms

6 128.32.197.4 (128.32.197.4) 59 ms 119 ms 39 ms 7 131.119.2.5 (131.119.2.5) 59 ms 59 ms 39 ms 8 129.140.70.13 (129.140.70.13) 80 ms 79 ms 99 ms 9 129.140.71.6 (129.140.71.6) 139 ms 139 ms 159 ms 10 129.140.81.7 (129.140.81.7) 199 ms 180 ms 300 ms 11 129.140.72.17 (129.140.72.17) 300 ms 239 ms 239 ms 12 * * * 13 128.121.54.72 (128.121.54.72) 259 ms 499 ms 279 ms 14 * * * 15 * * * 16 * * * 17 * * * 18 ALLSPICE.LCS.MIT.EDU (18.26.0.115) 339 ms 279 ms 279 ms Note that the gateways 12, 14, 15, 16 & 17 hops away either don't send ICMP "time exceeded" messages or send them with a ttl too small to reach

us. 14 - 17 are running the MIT C Gateway code that doesn't send "time

exceeded"s. God only knows what's going on with 12. The silent gateway 12 in the above may be the result of a bug in the 4.[23] BSD network code (and its derivatives): 4.x (x <= 3) sends an unreachable message using whatever ttl remains in the original datagram. Since, for gateways, the remaining ttl is zero, the ICMP "time exceeded" is guaranteed to not make it back to us. The behavior of this bug is slightly more interesting when it appears on the destination system: 1 helios.ee.lbl.gov (128.3.112.1) 0 ms 0 ms 0 ms

2 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 19 ms 39 ms

3 lilac-dmc.Berkeley.EDU (128.32.216.1) 19 ms 39 ms 19 ms

4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 39 ms 40 ms 19 ms

5 ccn-nerif35.Berkeley.EDU (128.32.168.35) 39 ms 39 ms 39 ms

6 csgw.Berkeley.EDU (128.32.133.254) 39 ms 59 ms 39 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * * 12 * * * 13 rip.Berkeley.EDU (128.32.131.22) 59 ms ! 39 ms ! 39 ms ! Notice that there are 12 "gateways" (13 is the final destination) and exactly the last half of them are "missing". What's really happening is

that rip (a Sun-3 running Sun OS3.5) is using the ttl from our arriving

datagram as the ttl in its ICMP reply. So, the reply will time out on the return path (with no notice sent to anyone since ICMP's aren't sent for ICMP's) until we probe with a ttl that's at least twice the path length. I.e., rip is really only 7 hops away. A reply that returns with a ttl of 1 is a clue this problem exists. TTrraacceerroouuttee prints a "!" after the time if the ttl is <= 1. Since vendors ship a lot of obsolete (DEC's

Ultrix, Sun 3.x) or non-standard (HPUX) software, expect to see this

problem frequently and/or take care picking the target host of your probes.

Other possible annotations after the time are !!HH, !!NN, or !!PP (host, net-

work or protocol unreachable), !!SS (source route failed), !!FF (fragmenta-

tion needed - the RFC1191 Path MTU Discovery value is displayed), !!XX

(communication administratively prohibited), !!VV (host precedence viola-

tion), !!CC (precedence cutoff in effect), or !!<> (ICMP unreachable code ). These are defined by RFC1812 (which supersedes RFC1716). If almost all the probes result in some kind of unreachable, ttrraacceerroouuttee will give up and exit.

This program is intended for use in network testing, measurement and man-

agement. It should be used primarily for manual fault isolation. Because of the load it could impose on the network, it is unwise to use ttrraacceerroouuttee during normal operations or from automated scripts. AUTHOR Implemented by Van Jacobson from a suggestion by Steve Deering. Debugged by a cast of thousands with particularly cogent suggestions or fixes from C. Philip Wood, Tim Seaver and Ken Adelman.

BUGS

When using protocols other than UDP, functionality is reduced. In par-

ticular, the last packet will often appear to be lost, because even though it reaches the destination host, there's no way to know that because no ICMP message is sent back. In the TCP case, ttrraacceerroouuttee should listen for a RST from the destination host (or an intermediate router that's filtering packets), but this is not implemented yet. 4.3 Berkeley Distribution September 21, 2000 4.3 Berkeley Distribution