NAME
ttnnffttppdd - Internet File Transfer Protocol server
SYNOPSIS
ttnnffttppdd [-4466DDddHHllQQqqrrssUUuuWWwwXX] [-aa anondir] [-CC user] [-cc confdir]
[-ee emailaddr] [-hh hostname] [-LL xferlogfile] [-PP dataport]
[-VV version]
DESCRIPTION
ttnnffttppdd is the Internet File Transfer Protocol server process. The server uses the TCP protocol and listens at the port specified in the ``ftp'' service specification; see services(5). Available options:-44 When -DD is specified, bind to IPv4 addresses only.
-66 When -DD is specified, bind to IPv6 addresses only.
-aa anondir
Define anondir as the directory to chroot(2) into for anonymous logins. Default is the home directory for the ftp user. Thiscan also be specified with the ftpd.conf(5) cchhrroooott directive.
-CC user
Check whether user would be granted access under the restrictions given in ftpusers(5) and exit without attempting a connection. ttnnffttppdd exits with an exit code of 0 if access would be granted, or 1 otherwise. This can be useful for testing configurations.-cc confdir
Change the root directory of the configuration files from``/etc'' to confdir. This changes the directory for the follow-
ing files: /etc/ftpchroot, /etc/ftpusers, /etc/ftpwelcome,/etc/motd, and the file specified by the ftpd.conf(5) lliimmiitt
directive.-DD Run as daemon. ttnnffttppdd will listen on the default FTP port for
incoming connections and fork a child for each connection. This is lower overhead than starting ttnnffttppdd from inetd(8) and thus might be useful on busy servers to reduce load.-dd Debugging information is written to the syslog using a facility
of LOGFTP.-ee emailaddr
Use emailaddr for the ``%E'' escape sequence (see Display file
escape sequences)-HH Equivalent to ``-h `hostname`''.
-hh hostname
Explicitly set the hostname to advertise as to hostname. The default is the hostname associated with the IP address thatttnnffttppdd is listening on. This ability (with or without -hh), in
conjunction with -cc confdir, is useful when configuring `virtual'
FTP servers, each listening on separate addresses as separate names. Refer to inetd.conf(5) for more information on starting services to listen on specific IP addresses.-LL xferlogfile
Log wu-ftpd style `xferlog' entries to xferlogfile.
-ll Each successful and failed FTP session is logged using syslog
with a facility of LOGFTP. If this option is specified more than once, the retrieve (get), store (put), append, delete, make directory, remove directory and rename operations and their file name arguments are also logged.-PP dataport
Use dataport as the data port, overriding the default of using the port one less that the port ttnnffttppdd is listening on.-QQ Disable the use of pid files for keeping track of the number of
logged-in users per class. This may reduce the load on heavily
loaded FTP servers.-qq Enable the use of pid files for keeping track of the number of
logged-in users per class. This is the default.
-rr Permanently drop root privileges once the user is logged in. The
use of this option may result in the server using a port otherthan the (listening-port - 1) for PPOORRTT style commands, which is
contrary to the RRFFCC 995599 specification, but in practice very few clients rely upon this behaviour. See SECURITY CONSIDERATIONS below for more details.-ss Require a secure authentication mechanism like Kerberos or S/Key
to be used.-UU Don't log each concurrent FTP session to /var/run/utmp. This is
the default.-uu Log each concurrent FTP session to /var/run/utmp, making them
visible to commands such as who(1).-VV version
Use version as the version to advertise in the login banner and in the output of SSTTAATT and SSYYSSTT instead of the default versioninformation. If version is empty or `-' then don't display any
version information.-WW Don't log each FTP session to /var/log/wtmp.
-ww Log each FTP session to /var/log/wtmp, making them visible to
commands such as last(1). This is the default.-XX Log wu-ftpd style `xferlog' entries to the syslog, prefixed with
``xferlog: '', using a facility of LOGFTP. These syslog entriescan be converted to a wu-ftpd style xferlog file suitable for
input into a third-party log analysis tool with a command similar
to: grep 'xferlog: ' /var/log/xferlog | \sed -e 's/^.*xferlog: //' > wuxferlog
The file /etc/nologin can be used to disable FTP access. If the file exists, ttnnffttppdd displays it and exits. If the file /etc/ftpwelcome exists, ttnnffttppdd prints it before issuing the ``ready'' message. If the file /etc/motd exists (under the chroot directory if applicable), ttnnffttppdd prints it after a successful login. This may be changed with theftpd.conf(5) directive mmoottdd.
The ttnnffttppdd server currently supports the following FTP requests. The case of the requests is ignored. RReeqquueesstt DDeessccrriippttiioonn ABOR abort previous command ACCT specify account (ignored) ALLO allocate storage (vacuously) APPE append to a file CDUP change to parent of current working directory CWD change working directory DELE delete a fileEPSV prepare for server-to-server transfer
EPRT specify data connection port FEAT list extra features that are not defined in RRFFCC 995599 HELP give help informationLIST give list files in a directory (``ls -lA'')
LPSV prepare for server-to-server transfer
LPRT specify data connection portMLSD list contents of directory in a machine-processable form
MLST show a pathname in a machine-processable form
MKD make a directory MDTM show last modification time of file MODE specify data transfer mode NLST give name list of files in directory NOOP do nothing OPTS define persistent options for a given command PASS specify passwordPASV prepare for server-to-server transfer
PORT specify data connection port PWD print the current working directory QUIT terminate session REST restart incomplete transfer RETR retrieve a file RMD remove a directoryRNFR specify rename-from file name
RNTO specify rename-to file name
SITE non-standard commands (see next section)
SIZE return size of file STAT return status of server STOR store a file STOU store a file with a unique name STRU specify data transfer structure SYST show operating system type of server system TYPE specify data transfer type USER specify user name XCUP change to parent of current working directory (deprecated) XCWD change working directory (deprecated) XMKD make a directory (deprecated) XPWD print the current working directory (deprecated) XRMD remove a directory (deprecated)The following non-standard or UNIX specific commands are supported by the
SITE request. RReeqquueesstt DDeessccrriippttiioonn CHMOD change mode of a file, e.g. ``SITE CHMOD 755 filename'' HELP give help information.IDLE set idle-timer, e.g. ``SITE IDLE 60''
RATEGET set maximum get rate throttle in bytes/second, e.g. ``SITE RATEGET 5k'' RATEPUT set maximum put rate throttle in bytes/second, e.g. ``SITE RATEPUT 5k'' UMASK change umask, e.g. ``SITE UMASK 002'' The following FTP requests (as specified in RRFFCC 995599) are recognized, butare not implemented: AACCCCTT, SSMMNNTT, and RREEIINN. MMDDTTMM and SSIIZZEE are not speci-
fied in RRFFCC 995599, but will appear in the next updated FTP RFC. The ttnnffttppdd server will abort an active file transfer only when the AABBOORR command is preceded by a Telnet "Interrupt Process" (IP) signal and a Telnet "Synch" signal in the command Telnet stream, as described in Internet RRFFCC 995599. If a SSTTAATT command is received during a data transfer, preceded by a Telnet IP and Synch, transfer status will be returned. ttnnffttppdd interprets file names according to the ``globbing'' conventions used by csh(1). This allows users to use the metacharacters ``*?[]{}~''. UUsseerr aauutthheennttiiccaattiioonn ttnnffttppdd authenticates users according to five rules. 1. The login name must be in the system password data base and not have a null password. In this case a password must beprovided by the client before any file operations may be per-
formed. If the user has an S/Key key, the response from a successful UUSSEERR command will include an S/Key challenge. The client may choose to respond with a PPAASSSS command giving eithera standard password or an S/Key one-time password. The server
will automatically determine which type of password it has been given and attempt to authenticate accordingly. See skey(1) for more information on S/Key authentication. S/Key is a Trademark of Bellcore. 2. The login name must be allowed based on the information in ftpusers(5). 3. The user must have a standard shell returned by getusershell(3). If the user's shell field in the password database is empty, the shell is assumed to be /bin/sh. As per shells(5), the user's shell must be listed with full path in /etc/shells.4. If directed by the file ftpchroot(5) the session's root direc-
tory will be changed by chroot(2) to the directory specifiedin the ftpd.conf(5) cchhrroooott directive (if set), or to the home
directory of the user. However, the user must still supply a password. This feature is intended as a compromise between a fully anonymous account and a fully privileged account. The account should also be set up as for an anonymous account. 5. If the user name is ``anonymous'' or ``ftp'', an anonymous FTP account must be present in the password file (user ``ftp''). In this case the user is allowed to log in by specifying any password (by convention an email address for the user should be used as the password). The server performs a chroot(2) to the directory specified inthe ftpd.conf(5) cchhrroooott directive (if set), the -aa anondir
directory (if set), or to the home directory of the ``ftp'' user. The server then performs a chdir(2) to the directory specifiedin the ftpd.conf(5) hhoommeeddiirr directive (if set), otherwise to
/.If other restrictions are required (such as disabling of cer-
tain commands and the setting of a specific umask), thenappropriate entries in ftpd.conf(5) are required.
If the first character of the password supplied by an anony-
mous user is ``-'', then the verbose messages displayed at
login and upon a CCWWDD command are suppressed. DDiissppllaayy ffiillee eessccaappee sseeqquueenncceess When ttnnffttppdd displays various files back to the client (such as /etc/ftpwelcome and /etc/motd), various escape strings are replaced with information pertinent to the current connection. The supported escape strings are: EEssccaappee DDeessccrriippttiioonn%c Class name.
%C Current working directory.
%E Email address given with -ee.
%L Local hostname.
%M Maximum number of users for this class. Displays
``unlimited'' if there's no limit.%N Current number of users for this class.
%R Remote hostname.
%s If the result of the most recent ``%M'' or ``%N'' was not
``1'', print an ``s''.%S If the result of the most recent ``%M'' or ``%N'' was not
``1'', print an ``S''.%T Current time.
%U User name.
%% A ``%'' character.
SSeettttiinngg uupp aa rreessttrriicctteedd ffttpp ssuubbttrreeee In order that system security is not breached, it is recommended that the subtrees for the ``ftp'' and ``chroot'' accounts be constructed with care, following these rules (replace ``ftp'' in the following directory names with the appropriate account name for `chroot' users): ~ftp Make the home directory owned by ``root'' and unwritable by anyone. ~ftp/bin Make this directory owned by ``root'' and unwritableby anyone (mode 555). Generally any conversion com-
mands should be installed here (mode 111). ~ftp/etc Make this directory owned by ``root'' and unwritable by anyone (mode 555). The files pwd.db (see passwd(5)) and group (see group(5)) must be present for the LLIISSTT command to be able to display owner and group names instead of numbers. The password field in passwd(5) is not used, and should not contain real passwords. The file motd, if present, will be printed after a successful login. These files should be mode 444. ~ftp/pub This directory and the subdirectories beneath it should be owned by the users and groups responsible for placing files in them, and be writable only by them (mode 755 or 775). They should not be owned or writable by ftp or its group. ~ftp/incoming This directory is where anonymous users place files they upload. The owners should be the user ``ftp'' and an appropriate group. Members of this group will be the only users with access to these filesafter they have been uploaded; these should be peo-
ple who know how to deal with them appropriately. If you wish anonymous FTP users to be able to seethe names of the files in this directory the permis-
sions should be 770, otherwise they should be 370.The following ftpd.conf(5) directives should be
used: modify guest off umask guest 0707 upload guest on This will result in anonymous users being able to upload files to this directory, but they will not be able to download them, delete them, or overwrite them, due to the umask and disabling of the commands mentioned above. ~ftp/tmp This directory is used to create temporary fileswhich contain the error messages generated by a con-
version or LLIISSTT command. The owner should be the user ``ftp''. The permissions should be 300. If you don't enable conversion commands, or don't want anonymous users uploading files here (see~ftp/incoming above), then don't create this direc-
tory. However, error messages from conversion or LLIISSTT commands won't be returned to the user. (This is the traditional behaviour.) Note that theftpd.conf(5) directive uuppllooaadd can be used to prevent
users uploading here.To set up "ftp-only" accounts that provide only FTP, but no valid shell
login, you can copy/link /sbin/nologin to /sbin/ftplogin, and enter/sbin/ftplogin to /etc/shells to allow logging-in via FTP into the
accounts, which must have /sbin/ftplogin as login shell. FILES /etc/ftpchroot List of normal users whose root directory should be changed via chroot(2)./etc/ftpd.conf Configure file conversions and other settings.
/etc/ftpusers List of unwelcome/restricted users. /etc/ftpwelcome Welcome notice before login. /etc/motd Welcome notice after login. /etc/nologin If it exists, displayed and access is refused./var/run/ftpd.pids-CLASS
State file of logged-in processes for the ttnnffttppdd class
`CLASS'./var/run/utmp List of logged-in users on the system.
/var/log/wtmp Login history database.SEE ALSO
ftp(1), skey(1), who(1), getusershell(3), ftpchroot(5), ftpd.conf(5),
ftpusers(5), syslogd(8) STANDARDS ttnnffttppdd recognizes all commands in RRFFCC 995599, follows the guidelines in RRFFCC11112233, recognizes all commands in RRFFCC 22222288 (although they are not sup-
ported yet), and supports the extensions from RRFFCC 22338899, RRFFCC 22442288 andddrraafftt-iieettff-ffttppeexxtt-mmllsstt-1111.
HISTORY The ttnnffttppdd command appeared in 4.2BSD.Various features such as the ftpd.conf(5) functionality, RRFFCC 22338899, and
ddrraafftt-iieettff-ffttppeexxtt-mmllsstt-1111 support was implemented in NetBSD 1.3 and later
releases by Luke Mewburn.BUGS
The server must run as the super-user to create sockets with privileged
port numbers (i.e, those less than IPPORTRESERVED, which is 1024). If ttnnffttppdd is listening on a privileged port it maintains an effective userid of the logged in user, reverting to the super-user only when binding
addresses to privileged sockets. The -rr option can be used to override
this behaviour and force privileges to be permanently revoked; see SECURITY CONSIDERATIONS below for more details. ttnnffttppdd may have trouble handling connections from scoped IPv6 addresses, or IPv4 mapped addresses (IPv4 connection on AFINET6 socket). For the latter case, running two daemons, one for IPv4 and one for IPv6, will avoid the problem. SSEECCUURRIITTYY CCOONNSSIIDDEERRAATTIIOONNSS RRFFCC 995599 provides no restrictions on the PPOORRTT command, and this can leadto security problems, as ttnnffttppdd can be fooled into connecting to any ser-
vice on any host. With the ``checkportcmd'' feature of the ftpd.conf(5),
PPOORRTT commands with different host addresses, or TCP ports lower thanIPPORTRESERVED will be rejected. This also prevents `third-party proxy
ftp' from working. Use of this option is strongly recommended, and enabled by default.By default ttnnffttppdd uses a port that is one less than the port it is lis-
tening on to communicate back to the client for the EEPPRRTT, LLPPRRTT, and PPOORRTTcommands, unless overridden with -PP dataport. As the default port for
ttnnffttppdd (21) is a privileged port below IPPORTRESERVED, ttnnffttppdd retains the ability to switch back to root privileges to bind these ports. In order to increase security by reducing the potential for a bug in ttnnffttppdd providing a remote root compromise, ttnnffttppdd will permanently drop root privileges if one of the following is true: 1. ttnnffttppdd is running on a port greater than IPPORTRESERVED and the user has logged in as a `guest' or `chroot' user.2. ttnnffttppdd was invoked with -rr.
Don't create ~ftp/tmp if you don't want anonymous users to upload files there. That directory is only necessary if you want to display the error messages of conversion commands to the user. Note that if uploads aredisabled with the ftpd.conf(5) directive uuppllooaadd, then this directory can-
not be abused by the user in this way, so it should be safe to create. BSD August 4, 2005 BSD