Manual Pages for UNIX Darwin command on man File::Find

File::Find(3pm) Perl Programmers Reference Guide File::Find(3pm)

NAME

File::Find - Traverse a directory tree.

SYNOPSIS

use File::Find;

find(\&wanted, @directoriestosearch); sub wanted { ... }

use File::Find;

finddepth(\&wanted, @directoriestosearch); sub wanted { ... }

use File::Find;

find({ wanted => \&process, follow => 1 }, '.');

DESCRIPTION

These are functions for searching through directory trees doing work on

each file found similar to the Unix find command. File::Find exports

two functions, "find" and "finddepth". They work similarly but have subtle differences. ffiinndd find(\&wanted, @directories);

find(\%options, @directories);

"find()" does a depth-first search over the given @directories in

the order they are given. For each file or directory found, it calls the &wanted subroutine. (See below for details on how to use the &wanted function). Additionally, for each directory found, it

will "chdir()" into that directory and continue the search, invok-

ing the &wanted function on each file or subdirectory in the direc-

tory. ffiinnddddeepptthh finddepth(\&wanted, @directories);

finddepth(\%options, @directories);

"finddepth()" works just like "find()" except that is invokes the

&wanted function for a directory after invoking it for the direc-

tory's contents. It does a postorder traversal instead of a pre-

order traversal, working from the bottom of the directory tree up where "find()" works from the top of the tree down.

%%ooppttiioonnss

The first argument to "find()" is either a code reference to your &wanted function, or a hash reference describing the operations to be performed for each file. The code reference is described in "The wanted function" below. Here are the possible keys for the hash: "wanted" The value should be a code reference. This code reference is described in "The wanted function" below. "bydepth" Reports the name of a directory only AFTER all its entries have been reported. Entry point "finddepth()" is a shortcut for specifying "<{ bydepth =" 1 }>> in the first argument of "find()". "preprocess" The value should be a code reference. This code reference is used to

preprocess the current directory. The name of the currently pro-

cessed directory is in $File::Find::dir. Your preprocessing function

is called after "readdir()", but before the loop that calls the "wanted()" function. It is called with a list of strings (actually file/directory names) and is expected to return a list of strings.

The code can be used to sort the file/directory names alphabeti-

cally, numerically, or to filter out directory entries based on

their name alone. When follow or followfast are in effect, "prepro-

cess" is a no-op.

"postprocess" The value should be a code reference. It is invoked just before

leaving the currently processed directory. It is called in void con-

text with no arguments. The name of the current directory is in

$File::Find::dir. This hook is handy for summarizing a directory,

such as calculating its disk usage. When follow or followfast are

in effect, "postprocess" is a no-op.

"follow" Causes symbolic links to be followed. Since directory trees with symbolic links (followed) may contain files more than once and may even have cycles, a hash has to be built up with an entry for each file. This might be expensive both in space and time for a large directory tree. See followfast and followskip below. If either follow or followfast is in effect: * It is guaranteed that an lstat has been called before the user's "wanted()" function is called. This enables fast file checks involving . Note that this guarantee no longer holds if follow or followfast are not set.

* There is a variable $File::Find::fullname which holds the

absolute pathname of the file with all symbolic links

resolved. If the link is a dangling symbolic link, then full-

name will be set to "undef".

This is a no-op on Win32.

"followfast" This is similar to follow except that it may report some files more than once. It does detect cycles, however. Since only symbolic links have to be hashed, this is much cheaper both in space and time. If processing a file more than once (by the user's "wanted()" function) is worse than just taking time, the option follow should be used.

This is also a no-op on Win32.

"followskip" "followskip==1", which is the default, causes all files which are neither directories nor symbolic links to be ignored if they are about to be processed a second time. If a directory or a symbolic

link are about to be processed a second time, File::Find dies.

"followskip==0" causes File::Find to die if any file is about to be

processed a second time.

"followskip==2" causes File::Find to ignore any duplicate files and

directories but to proceed normally otherwise. "danglingsymlinks" If true and a code reference, will be called with the symbolic link name and the directory it lives in as arguments. Otherwise, if true

and warnings are on, warning "symboliclinkname is a dangling sym-

bolic link\n" will be issued. If false, the dangling symbolic link will be silently ignored. "nochdir" Does not "chdir()" to each directory as it recurses. The "wanted()"

function will need to be aware of this, of course. In this case, $

will be the same as $File::Find::name.

"untaint"

If find is used in taint-mode (-T command line switch or if EUID !=

UID or if EGID != GID) then internally directory names have to be untainted before they can be chdir'ed to. Therefore they are checked against a regular expression untaintpattern. Note that all names passed to the user's wanted() function are still tainted. If this

option is used while not in taint-mode, "untaint" is a no-op.

"untaintpattern" See above. This should be set using the "qr" quoting operator. The

default is set to "qr|^([-+@\w./]+)$|". Note that the parentheses

are vital. "untaintskip" If set, a directory which fails the untaintpattern is skipped,

including all its sub-directories. The default is to 'die' in such a

case. The wanted function The "wanted()" function does whatever verifications you want on each

file and directory. Note that despite its name, the "wanted()" func-

tion is a generic callback function, and does nnoott tell File::Find if a

file is "wanted" or not. In fact, its return value is ignored. The wanted function takes no arguments but rather does its work through a collection of variables.

$File::Find::dir is the current directory name,

$ is the current filename within that directory

$File::Find::name is the complete pathname to the file.

Don't modify these variables. For example, when examining the file /some/path/foo.ext you will have:

$File::Find::dir = /some/path/

$ = foo.ext

$File::Find::name = /some/path/foo.ext

You are chdir()'d to $File::Find::dir when the function is called,

unless "nochdir" was specified. Note that when changing to directories is in effect the root directory (/) is a somewhat special case inasmuch

as the concatenation of $File::Find::dir, '/' and $ is not literally

equal to $File::Find::name. The table below summarizes all variants:

$File::Find::name $File::Find::dir $

default / / . nochdir=>0 /etc / etc /etc/x /etc x nochdir=>1 / / / /etc / /etc /etc/x /etc /etc/x When or are in effect, there is also a

$File::Find::fullname. The function may set $File::Find::prune to

prune the tree unless "bydepth" was specified. Unless "follow" or "followfast" is specified, for compatibility reasons (find.pl, find2perl) there are in addition the following globals available:

$File::Find::topdir, $File::Find::topdev, $File::Find::topino,

$File::Find::topmode and $File::Find::topnlink.

This library is useful for the "find2perl" tool, which when fed,

find2perl / -name .nfs\* -mtime +7 \

-exec rm -f {} \; -o -fstype nfs -prune

produces something like: sub wanted { /^\.nfs.*\z/s &&

(($dev, $ino, $mode, $nlink, $uid, $gid) = lstat($)) &&

int(-M ) > 7 &&

unlink($)

($nlink || (($dev, $ino, $mode, $nlink, $uid, $gid) = lstat($))) &&

$dev < 0 &&

($File::Find::prune = 1);

}

Notice the "" in the above "int(-M )": the "" is a magical filehan-

dle that caches the information from the preceding "stat()", "lstat()", or filetest. Here's another interesting wanted function. It will find all symbolic links that don't resolve: sub wanted {

-l && !-e && print "bogus link: $File::Find::name\n";

}

See also the script "pfind" on CPAN for a nice application of this mod-

ule. WWAARRNNIINNGGSS

If you run your program with the "-w" switch, or if you use the "warn-

ings" pragma, File::Find will report warnings for several weird situa-

tions. You can disable these warnings by putting the statement

no warnings 'File::Find';

in the appropriate scope. See perllexwarn for more info about lexical warnings. CCAAVVEEAATT

$dontusenlink

You can set the variable $File::Find::dontusenlink to 1, if you

want to force File::Find to always stat directories. This was used

for file systems that do not have an "nlink" count matching the num-

ber of sub-directories. Examples are ISO-9660 (CD-ROM), AFS, HPFS

(OS/2 file system), FAT (DOS file system) and a couple of others.

You shouldn't need to set this variable, since File::Find should now

detect such file systems on-the-fly and switch itself to using stat.

This works even for parts of your file system, like a mounted CD-ROM.

If you do set $File::Find::dontusenlink to 1, you will notice

slow-downs.

symlinks Be aware that the option to follow symbolic links can be dangerous. Depending on the structure of the directory tree (including symbolic links to directories) you might traverse a given (physical) directory more than once (only if "followfast" is in effect). Furthermore, deleting or changing files in a symbolically linked directory might cause very unpleasant surprises, since you delete or change files in an unknown directory. NNOOTTEESS +o Mac OS (Classic) users should note a few differences: +o The path separator is ':', not '/', and the current directory

is denoted as ':', not '.'. You should be careful about speci-

fying relative pathnames. While a full path always begins with a volume name, a relative pathname should always begin with a ':'. If specifying a volume name only, a trailing ':' is required.

+o $File::Find::dir is guaranteed to end with a ':'. If $ con-

tains the name of a directory, that name may or may not end

with a ':'. Likewise, $File::Find::name, which contains the

complete pathname to that directory, and $File::Find::fullname,

which holds the absolute pathname of that directory with all symbolic links resolved, may or may not end with a ':'. +o The default "untaintpattern" (see above) on Mac OS is set to

"qr|^(.+)$|". Note that the parentheses are vital.

+o The invisible system file "Icon\015" is ignored. While this

file may appear in every directory, there are some more invisi-

ble system files on every volume, which are all located at the volume root level (i.e. "MacintoshHD:"). These system files

are nnoott excluded automatically. Your filter may use the fol-

lowing code to recognize invisible files or directories (requires Mac::Files): use Mac::Files;

# invisible() - returns 1 if file/directory is invisible,

# 0 if it's visible or undef if an error occurred

sub invisible($) {

my $file = shift;

my ($fileCat, $fileInfo);

my $invisibleflag = 1 << 14;

if ( $fileCat = FSpGetCatInfo($file) ) {

if ($fileInfo = $fileCat->ioFlFndrInfo() ) {

return (($fileInfo->fdFlags & $invisibleflag) && 1);

} } return undef; } Generally, invisible files are system files, unless an odd

application decides to use invisible files for its own pur-

poses. To distinguish such files from system files, you have to look at the ttyyppee and ccrreeaattoorr file attributes. The MacPerl

built-in functions "GetFileInfo(FILE)" and "SetFileInfo(CRE-

ATOR, TYPE, FILES)" offer access to these attributes (see MacPerl.pm for details). Files that appear on the desktop actually reside in an (hidden) directory named "Desktop Folder" on the particular disk volume. Note that, although all desktop files appear to be on the same "virtual" desktop, each disk volume actually maintains its own "Desktop Folder" directory.

BUGS AND CAVEATS

Despite the name of the "finddepth()" function, both "find()" and

"finddepth()" perform a depth-first search of the directory hierarchy.

HISTORY

File::Find used to produce incorrect results if called recursively.

During the development of perl 5.8 this bug was fixed. The first fixed